Another tool which might be useful for cutting plastic cleanly without
melting is an X-Acto razor saw. Very thin, very sharp, extremely fine-tooth
hard-back blade which fits a large X-Acto tool handle. Available at hobby
stores where you get X-Acto stuff.
----- Original Message ----- 
From: "Mark Benson" <[EMAIL PROTECTED]>
To: "Compact Macs" <[EMAIL PROTECTED]>
Sent: Wednesday, October 01, 2003 2:34 PM
Subject: Re: CC Mystic back panel


> On Monday, September 22, 2003, at 08:05 AM, Brandon Davis wrote:
>
> > The hack saw blade method just seemed a WHOLE lot easier then from
> > what I've
> > read on the 'net with people using Dremels and glue and such.
> >
> > So I  thought someone might want to add this to their CC Mystic
> > techniques
> > repertoire.
>
> I have to agree there - I did a mod on a IIcx to fit a 7100 Logic
> Board. I had to do substantial amounts of surgery where the ports came
> out at the back to allow it to fit and to allow access to all the ports.
>
> I have to sat I'd be very scared of a Dremel - for one thing it gets
> very hot and melts the plastic which is asking for trouble and secondly
> it has a lot of momentum of it's own which means it can take a walk in
> the wrong direction. On the other hand the hacksaw blade offers total
> control. It also gives you arm ache an takes hours but that's part of
> the craft!
>
> I would also advise you have a set of course files and a a set of
> smaller fine files. The fine ones clog quickly so they really can only
> be used for touch up work, I used course metalwork files for removing
> material and the fine ones to square up corners and take out any marks.
>
> -- 
> Mark Benson
>
> AIM - SilValleyPirate
> MSN - [EMAIL PROTECTED]
> Visit FlatPackMacs online: <http://fpm.68kmac.com>
> Visit my Homepage: <http://homepage.mac.com/markbenson>
>
> "Never send a human to do a machine's job."
> -The Matrix
>
>
> -- 
> Compact Macs is sponsored by <http://lowendmac.com/>.
>
>       Support Low End Mac <http://lowendmac.com/lists/support.html>
>
> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml>
>   --> AOL users, remove "mailto:";
> Send list messages to:  <mailto:[EMAIL PROTECTED]>
> To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
> For digest mode, email: <mailto:[EMAIL PROTECTED]>
> Subscription questions: <mailto:[EMAIL PROTECTED]>
> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/>
>
>
> ---------------------------------------------------------------
> >The Think Different Store
> http://www.ThinkDifferentStore.com
> ---------------------------------------------------------------

-- 
Compact Macs is sponsored by <http://lowendmac.com/>.

      Support Low End Mac <http://lowendmac.com/lists/support.html>

Compact Macs list info: <http://lowendmac.com/lists/compact.shtml>
  --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/>


---------------------------------------------------------------
>The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------

Reply via email to