I just received a "new" Analog Board for my 128k w/ MacSnap. The brightness control (variable) was bent and some of the pins pulled from the board in shipping. So, I soldered it back up, and heated and added solder to the J1 connector points as well, since those are a known problem area. Upon power up, the machine made somewhat of a sizzling sound, but no beep or anything on the screen. I'm hoping that this A/B can be fixed.. still have the old flup-flup one for parts. When powered up again, it does the same things as it did the first time.
I tried hooking the logic board from this machine up to a known working Mac Plus and it booted and ran just fine, so I know it isn't the issue! Does anyone know what the issue is with this new board? Did I mess up the solder joints on the J1 connector? Any help is appreciated! -Chris -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
