>Short of plugging a power supply into a working machine and potentially >blowing it up, how can I test it? My voltmeter doesn't seem to do what I'd >expect; shouldn't there be 5V and 12V pins on the power connector?
The unveiling would come when it was plugged in to power alone. If it were going to blow, you'd likely see it happen not connected to anything. You can test at the wires and see if the 12 and 5 volt DC's coming thru, but the acid test would be when connected into a system. Jeff -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
