"Charles E. Fox" ha escrito: > Any water inside should be blotted up as much as possible, and > alcohol might help absorb the water. Let everything dry well before you > plug it in.
Warning: alcohol might damage the cases. Only use it on the circuit boards. Or better than that, do not use it. In order to dry a computer or a component, just let it sit down for two days in a warm dry place (the same procedure applies to drying motherboards that were dishwashed to eliminate the goo). "Ian P. Nixon" ha escrito: > I was also wondering, where can I purchase memory for the Mac SE??? In eBay, or in most second-hand computer stores. Just be sure to buy only SIMMs that have 8 or 9 chips (SIMMs with 3 chips will be unstable on older machines), and that they are of 100 ns. or faster (the less the nanoseconds, the faster the SIMMs are). Same goes to the Plus: in fact, an SE is little more than a Plus in a newer case (I know - the motherboards are different, but not *so* different). Saludos, Antonio Rodr�guez (Grijan) <ftp://grijan.cjb.net:21000/> -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
