on 6/29/04 8:28 AM, Niels Bretschneider at [EMAIL PROTECTED] wrote: > Hello everyone. > > I recently acquired a MicroMac PerformerPro accelerator for my SE. The > manual that came with and the MicroMac site say it can be installed in > the PDS slot on my SE, or directly on the CPU on the Plus or Classic. > > However, the card I received has no PDS connector - just empty > "soldering holes" (sorry, I don't know what they are really called in > English) in the place where the PDS connector is supposed to be. > > Can I install it on the CPU, too, like on the Plus? > > I tried it this morning just to see if it would mechanically fit (power > unplugged) and did not manage to fit the provided CPU "killy" clip > flush with the mainboard. > I guess that it will work mechanically and I just had no luck the first > time... > > Thanks for any suggestions, > > Niels > ~~~~~~~~~~~~~~~~~~~~~~~~
The Killy Clip presses down onto the existing 68000 CPU. Then the Performer presses down onto that. Having had a similar product for a Plus, I know they are a little difficult to place. They are only held down by friction so the mounting is unstable. But it's great you've found an accelerator for the Plus. Something I've wanted for years. Jeff G -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
