Classic and Classic II logic boards are exchangeable. The only problem is that if you put a Classic II board in a Classic case, you won't be able to use the microphone input because the case doesn't have the hole. AFAIK, analogue boards on both models are the same.
The vertical line problem is ussually blame of the analogue board, but it can also (sometimes) be produced by a faulty logic board or a loosy or otherwise problematic connection between both boards. Exchange the boards and see what happens. Check the two ends of the 12-pin cable tat connects both boards, and see if there are cold soldiers. Resolder it if neccessary. If that doesn't help, it's not too difficult to fix the a/b (see http://www.jagshouse.com/classicrepair.html - it talks about the SE/30, but I think the Classic's analogue board is simmilar enough for those instructions to fit it). Greetings, Antonio Rodr�guez (Grijan) <ftp://grijan.cjb.net:21000/> IG ha escrito: > Hi all, > > I have 2 classics with the same problem. > The screen are with vertical lines. > > I have 02 classic II working. > > My question is. > > Is this problem in the main board, or in the video board(that board that > stays in the right of the tube)? > If it is in the video board, can i put the main board of the classic in the > working classic II ? it will work? > > Thanks > > Mattos -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
