>Sean Billings ha escrito: > >> Also as the speaker is connected to the analog board and not the logic >> board, does anyone know if the audio is simply carried direct or is it >> amplified on the analog board? > >IIRC, the sound signal in the analogue connector of the digital board (the >white >two-rows connector near the center of the board) isn't amplified. A different >thing is the sound out jack: I think it has enough power to drive a pair of >headphones, even if it's intended to be connected to an amplifier. >
If it isn't amplified on the logic board, then that would mean there is an amplifier on the analogue board. Does anyone have a schematic or information on the Classic Analogue board to confirm this? I have a feeling though that all the amplification is done on the logic board and I don't know why but I think the faults I have, ie. quiet speaker output and the lack of a tx signal on both rs422 ports is linked. Regards Sean. -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
