Hello! I have got 2 Macintosh Classic II, both have the same problem: After Power on there is no sound. When the monitor turns on, there are only white vertical bars. Each bar is about 1 inch wide. cleaning RAM-sockets (like on SE/30 Simasi) doesn't change anything
first Classic II: after power up and power down several times this one finally starts MacOS from Harddisk. After power off for 5 minutes the same as before: no sound and stripes. Sometimes its comes up with checkboard pattern. on second Classic II: after severall power up/power down: startup-sound, then white screen, after 15 seconds screen changes to all white pixel. about 10 second later: Error-sound. Both worked fine about six months ago, then they were stored in a dry room. Now it was my first try to use these beauties again. On both PRAM-Battery is empty. What is wrong? Does a classic II start with empty PRAM-battery? Thanks in advance. Uwe Fritz -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:compact.macs@mail.maclaunch.com> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com ---------------------------------------------------------------
