Original Sender : "Gargoyle" <[EMAIL PROTECTED]>
---------------------------------
CM's mau nanya nih.
Kalo gak salah dulu pernah ditanyain, tapi CM gak ada arsipnya....sigh...
Kenapa LED indikator HDD di casing komputer gue sekarang suka nyala terus
ya?
Nyalanya pas masuk mode GUI Windoze, waktu booting sih mati.
Gara2nya sih karena kemarin ngerubah seting HDD gue dari secondary slave ke
secondary master.
Konfigurasi awalnya:
Quantum 2.1 GB UDMA - primary master
Maxtor 540 MB - primary slave
Sony 4x - secondary master
- Windows & Linux oke, tapinya gue nggak pengen gabungin drive UDMA & EIDE
di satu controller.
Setelah itu:
Quantum 2.1 GB UDMA - primary master
Sony 4x - secondary master
Maxtor 540 MB - secondary slave
- Windows oke aja, tapi di Linux si Maxtor nggak kedetek.
Terakhir:
Quantum 2.1 GB UDMA - primary master
Maxtor 540 MB - secondary master
Sony 4x - secondary slave
- Udah sip, tapinya LED HDD gue di Windows nyala mulu. Kalo di Linux nggak
masalah.
Pertanda apa nih? :)
Tolong di review dong.
Kalo ada saran bagusnya gimana?
ps. Apa bener kalo UDMA nggak bisa accept overclocking? Gue lihat statement
di Linux Mini-HOWTO; Ultra-DMA.
Gue kutip statementnya.
---------------------------------------------------
....
Are you overclocking?
If you are, beware! Here is a quote from the udma-generic
documentation:
DON'T OVERCLOCK the PCI bus. 37.5MHz is the maximum supported speed
for
the PCI bus. Some (supposedly compatible) UDMA drives will not even
take
37.5MHz, but should be OK at 33.3MHz.
In any case, NEVER, NEVER set the PCI bus to 41.5MHz.
The RECOMMENDED safe setting is 33MHz.
....
---------------------------------------------------
Ada yang bisa confirm?
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Nobody's perfect......but I'm nobody
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
----------------------------------------------------------------
Compu-Mania MailingList is provided by PT Centrin Utama
Maintained by : [EMAIL PROTECTED]
To Post a msg : Send mail to [EMAIL PROTECTED]
To Unsubscribe : Mail to [EMAIL PROTECTED]
BODY : unsubscribe Compu-Mania
For more information, send mail to [EMAIL PROTECTED]
with "HELP" in the BODY of your mail (without quote).
----------------------------------------------------------------
