I'm running a Dell Optiplex GX150 as a simple server with Server 2003 SP2 on it. Since it only came with USB 1.1, I bought a USB 2.0 PCI card from Iogear, the GIC220U. When I first installed it, it was recognized upon start-up and worked perfectly. A month later I came back to use it again, having made not changes to the computer or OS, and it was not working at 2.0 speeds anymore. I'm sure it's the card, because I switched it to a different slot and tried different mass storage devices. If I plug a hard drive into it, Windows says it does not recognize it at all. If I plug the same HD into an original USB 1.1 slot though, then switch it to the USB 2.0 slot, Windows will recognize it, but also says it's still plugged into a low-speed slot. Even though it is says it is plugged into a slow slot, it works at fast speeds but for only the first half of a file transfer, and then immediately slows to a USB 1.1 speed. I tried uninstalling the drivers and reinstalling them, but nothing worked. Any help or ideas would be appreciated.
--~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Computer Tech Support" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/computer-tech-support?hl=en -~----------~----~----~----~------~----~------~--~---
