hello, Thanks for the replies, but Mohammed there's a building/campus that has all some of its buildings on wireles and they work just fine.. Kwikone, am using Linksys WAP54g. Bridges. I hav attached one omni directional on one AP, and a bi-directional on another. The cable running from one antenna to an AP is very long and thick. Could this be a cause of the problem..
On 8/25/10, KwikOne <[email protected]> wrote: > OOPS... I forgot to indicate that "G" is only good for about > 38 meter indoors and about 140 meter outdoors. > And, "N" is about 70 meter indoor and about 250 meter outdoors. > These figures are taken from the IEEE 802.11 specs (see > http://en.wikipedia.org/wiki/IEEE_802.11 ) > The about is because there are a few factors that could cause it to > be less that that. > > On Aug 25, 12:18 pm, KwikOne <[email protected]> wrote: >> Actually... Is this Wireless "G" or "N"?? >> >> On Aug 24, 10:13 am, Mohammad AbuShady <[email protected]> wrote: >> >> > 200m is just too much for a wireless network, you'll either have to put >> > something in between or make a wired network which also can't be done in >> > 1 >> > piece, you'll still have to put something in between. >> >> > On Tue, Aug 24, 2010 at 2:25 PM, Rose Karanja >> > <[email protected]>wrote: >> >> > > Hello, >> > > I am a systems administrator. I just saw this group, and i like that >> > > someone is sharing solutions to problems we experience. I'd like to >> > > share some of my solutions too, I'll do that now that i have joined >> > > this group. >> >> > > Am having a problem with a wireless antenna. The first time i put it >> > > up, it was inside the building, on a window directly pointing the one >> > > across the road. Worked fine but kept timing out. so i put it outside >> > > it worked well for a few days and started timing out continously. So i >> > > brought it back inside and worked but still has a few time outs. >> >> > > I have two buildings 200 meters away from each other. one building >> > > joins the other (the main LAN) via a wireless bridge. So the two >> > > building have different antennas. >> >> > > Anyone has any suggestions on what i should do about this? >> >> > > Thanks, >> > > Rose. >> >> > > -- >> > > You received this message because you are subscribed to the Google >> > > Groups >> > > "Computer Tech Support" group. >> > > To post to this group, send email to >> > > [email protected]. >> > > To unsubscribe from this group, send email to >> > > [email protected]<computer-tech-support%[email protected]> >> > > . >> > > For more options, visit this group at >> > >http://groups.google.com/group/computer-tech-support?hl=en. > > -- > You received this message because you are subscribed to the Google Groups > "Computer Tech Support" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/computer-tech-support?hl=en. > > -- Thank you, Rose ________________________________________ -- You received this message because you are subscribed to the Google Groups "Computer Tech Support" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/computer-tech-support?hl=en.
