I have 147GB U320 SCSI HD w/ an AHA-39320A-R Host Adapter. I have no problem formatting the drive with the SCSI utility but, when I try to install XP Pro, I get a message giving me three choices:
1. Press 'Enter' to continue with the installation 2. Press 'R' to repair a previous installation 3. Press 'F3' to exit. So far(not here) I have been told to press: 1. 'ESC' so it ignores all that 2. 'F12' presumably to see if the drivers are loading properly 3. 'F2' to initiate the ASR during the setup process 4. 'F6' to load a driver from an outside source None of that has worked. I beginning to wonder if my XP Pro Setup disc is defective. Any help with this would be greatly appreciated. Christopher P.S. I recently upgraded my RAM from 512MB to, 1GB. That upgrade went fine but, could that have adversely affected XP? ************************************************************************ * ==> QUICK LIST-COMMAND REFERENCE - Put the following commands in <== * ==> the body of an email & send 'em to: [EMAIL PROTECTED] <== * Join the list: SUBSCRIBE COMPUTERGUYS-L Your Name * Too much mail? Try Daily Digests command: SET COMPUTERGUYS-L DIGEST * Tired of the List? Unsubscribe command: SIGNOFF COMPUTERGUYS-L * New address? From OLD address send: CHANGE COMPUTERGUYS-L YourNewAddress * Need more help? Send mail to: [EMAIL PROTECTED] ************************************************************************ * List archive from 1/1/2000 is on the MARC http://marc.info/?l=computerguys-l * List archive at www.mail-archive.com/[email protected]/ * RSS at www.mail-archive.com/[email protected]/maillist.xml * Messages bearing the header "X-No-Archive: yes" will not be archived ************************************************************************
