Also, per the vendors FAQ, check the firmware version of your ECB-3220 access point.
Rocky http://www.engeniustech.com/datacom/products/resources.aspx?faq=8&ID=170 When WDS is enabled in AP mode, wireless clients that were able to surf the internet, no longer have internet access after a certain period of time. Problem: With firmware version 1.36, 1.37, and 1.38, there was a bug found that would stop allowing associated wireless clients to surf the internet. Wireless clients were still able to get a DHCP assigned IP address, but could not access the internet. Solution: Please download firmware version 1.39 and upgrade any 3220 series devices that have WDS enabled. > > ---------------------------------------------------------------------- > > Date: Wed, 15 Jul 2009 00:25:29 -0400 > From: cindy brandt <[email protected]> > Subject: Re: need help with wifi problem in a large > art center > > The router is a SonicWall TZ190W the access points are > EnGenius > ECB-3220. THe access points are both located on the > second floor > which only has studios around the perimeter of the building > so it is > mostly open over the first floor in the center. There is a > very large > open staircase in the middle of the building up > to the third floor > studios. But I don't think that is the problem. My studio > is on an > outside wall on the third floor and if my connection is not > frozen (or > hung) it can be fine for hours. > ************************************************************************* ** List info, subscription management, list rules, archives, privacy ** ** policy, calmness, a member map, and more at http://www.cguys.org/ ** *************************************************************************
