Bugs item #1910326, was opened at 2008-03-09 04:15
Message generated for change (Tracker Item Submitted) made by Item Submitter
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=978127&aid=1910326&group_id=201579

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: Remote Communication
Group: None
Status: Open
Resolution: None
Priority: 5
Private: No
Submitted By: Simon Budig (sunib)
Assigned to: Nobody/Anonymous (nobody)
Summary: Erasing Flash does not work in 0.13

Initial Comment:
When updating the Config, erasing flash apparently does not work properly with 
e.g. a Logitech 525.

With Version 0.13 the symptoms look like this:

[EMAIL PROTECTED]:/home/simon/pakete/harmony-0.13# ./harmony -C 
~simon/Update.EZHex 
Harmony Control 0.13
Copyright 2007 Kevin Timmerman and Phil Dibowitz
This software is distributed under the GPLv3.

Requesting Identity: 100%                 done
Connecting to members.harmonyremote.com:  done
Invalidating flash:                       done
Erasing flash:        75%          Failed to read from device: -110 (could not 
detach kernel driver from interface 0: No data available)
Failed to erase flash! Bailing out!
Failed with error -110


This works with Version 0.12:

[EMAIL PROTECTED]:/home/simon/pakete/harmony-0.12# ./harmony -C 
~simon/Update.EZHex
Harmony Control 0.12
Copyright 2007 Kevin Timmerman and Phil Dibowitz
This software is distributed under the GPLv3.

Requesting Identity: *********************done
            Model: Logitech Harmony 525 (Mocha Decaf)
 Firmware Version: 2.6
 Hardware Version: 2.5
Config Flash Used: 19% (77 of 384 KiB)

Connecting to members.harmonyremote.com: done
Invalidating flash:                      done
Erasing flash:      **          done
Writing config:     100%    76 KiB       done
Verifying Config:   100%    76 KiB       done
Connecting to members.harmonyremote.com: done
Reseting...


I have not yet looked at what commands actually get sent to the remote, will do 
this tomorrow. It seems that the rework that has been done broke something.

Thanks,
        Simon

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=978127&aid=1910326&group_id=201579

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel

Reply via email to