WOW, GREAT!!! It works ... but.
All this work I did, I did it to manage my remote in an extended way.
My main goal is to program the yellow button, high-left corner, the only
one programmable button. But I didn't found how to do it.
I find for every device the ability to match a "power" button and a "quick
power" button. the first is usually associated to "power toggle", the
second would be the yellow button but it doesn't seem to be linked to
anything.
Example:
I have got a TV without DVB-T, and a mediaplayer DVB-T capable. They are
linked by HDMI cable.
Original myharmony.com site let me choose which devices I can command, so
that when I push the yellow button the remote send a powertoggle signal to
every device I choose.
But, my TV doesn't switch to HDMI input in auto mode, and my mediaplayer
doesn't switch to TV automatically. Then I would like to add the following
sequence to the yellow button:
- AV button on TV
- pause for 3-4 seconds
- AV button on mediaplayer
It would be nice if I'm able to change boot sequence as well.
Is there any way to do that?
Demetrio
2013/7/2 Scott Talbert <s...@techie.net>
> On Tue, 2 Jul 2013, Demetrio wrote:
>
> > I'm trying to use concordance with Harmony 300 on Ubuntu 13.04 64bit
> > I correctly made the bin, and it should works but... and now?
> > I tried to get info about my remote, and it worked. I tried to dump
> firmware
> > and configuration, but it didn't work, so I don't know how to begin.
> > I also compiled congruity and libconcord, but the problem was the same.
> > i suppose I have to begin with a first configuration file, but I cannot
> dump
> > it from remote so I don't know what kind of file it needs.
> >
> > Error message was always the same:
> > Failed to dump config: Error while reading from the remote
> > Failed with error 3
>
> Hi.
>
> I assume you are just trying to configure your remote? If so, you will
> need to run 'mhgui', which comes with congruity. 'mhgui' interfaces with
> the myharmony web service and will allow you to reconfigure your remote
> and sync the config to it (or you can download the config).
>
> If you are really wanting to dump the existing config file from the
> remote, I have a patch available to do so, but Phil hasn't incorporated it
> into concordance yet.
>
> Scott
>
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> concordance-devel mailing list
> concordance-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/concordance-devel
>
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel
