Hej guys, I read in the devel mailing list archives, that a patch was added in april 2015 to support Harmony touch remotes. http://sourceforge.net/p/concordance/mailman/message/33707258/
I cloned the current git source and compiled the binaries, but was unable to dump the config or firmware: ---8<--- Deep-Tought tmp # concordance -i -v Concordance 1.2 Copyright 2007 Kevin Timmerman and Phil Dibowitz This software is distributed under the GPLv3. Requesting identity: 100% done Model: Logitech Harmony Touch Skin: 99 Firmware Version: 4.8 Firmware Type: 0 Hardware Version: 1.0.0 External Flash: 512 KiB - FF:12 25F040 Architecture: 17 Protocol: 9 Manufacturer: Logitech Product: Harmony Remote IRL, ORL, FRL: 0, 0, 0 USB VID: 046D USB PID: C12B USB Ver: 1099 Serial Number: 20150105220144-003905 Config Flash Used: 0% (0 of 512 KiB) Success! Deep-Tought tmp # concordance -c -v Concordance 1.2 Copyright 2007 Kevin Timmerman and Phil Dibowitz This software is distributed under the GPLv3. Requesting identity: 100% done Failed to dump config: Error while reading from the remote Failed with error 3 Deep-Tought tmp # concordance -f -v Concordance 1.2 Copyright 2007 Kevin Timmerman and Phil Dibowitz This software is distributed under the GPLv3. Requesting identity: 100% done Failed to dump firmware: Error while reading from the remote Failed with error 3 --->8--- So, isn't the patch included in the current code? Cheers, David ------------------------------------------------------------------------------ _______________________________________________ concordance-devel mailing list concordance-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/concordance-devel
