Sure! github repo of screenshots: (sorry, i dont have an active ftp up at the moment) https://github.com/notdefault/harmony
[ajs@dovregubben-seelund-local LogitechHarmonyOne]$ lsusb Bus 002 Device 002: ID 8087:8000 Intel Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:8008 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 007: ID 8087:07dc Intel Corp. Bus 003 Device 006: ID 5986:0295 Acer, Inc Bus 003 Device 005: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 003 Device 004: ID 046d:c112 Logitech, Inc. Harmony 890 Remote Bus 003 Device 008: ID 04e8:6860 Samsung Electronics Co., Ltd Galaxy (MTP) Bus 003 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Last Command: [ajs@dovregubben-seelund-local LogitechHarmonyOne]$ concordance LatestFirmware.hfw Concordance 1.3 Copyright 2007 Kevin Timmerman and Phil Dibowitz This software is distributed under the GPLv3. Requesting identity: 100% done Sorry, firmware upgrades are not yet on your remote model yet. Failed to upload firmware: Model or configuration or operation unsupported Failed with error 15 -- -----Original Message----- From: Scott Talbert <s...@techie.net> To: AJ S. <a...@seelund.com>, concordance-devel@lists.sourceforge.net Subject: Re: [concordance-devel] Concordance 2019 - updates? Date: Sat, 07 Sep 2019 15:07:43 -0400 Can you send me that firmware file that it wants to load or put it online somewhere? On September 7, 2019 11:15:25 AM EDT, "AJ S." <a...@seelund.com> wrote: > Hey Scott, > It's the concordance tool, in commandline. > $ sudo concordance UpdateFirmare.hex*? > I was able to successfully load concordance and congruity with > Connectivity.EZup and I have the iframe extension to allow the header > on the webpage to pass through. > When I am logged in to the site, it directs me to download and run > update firmware, which starts congruity but crashes. > I run it via cli, and I get the update firmware note saying it's not > yet supported. > Currently have a harmony 890, with firmware 4.7 > I can run the official software in windows, but through a VM. I only > have a Linux based machine. I haven't tried it yet, but I have a win7 > install to use. > > Thanks - AJ > -------- Original message -------- > From: Scott Talbert <s...@techie.net> > Date: 9/7/19 10:56 AM (GMT-05:00) > To: concordance-devel@lists.sourceforge.net, "AJ S." <a...@seelund.com> > > Subject: Re: [concordance-devel] Concordance 2019 - updates? > > > > On September 7, 2019 9:18:58 AM EDT, "AJ S." <a...@seelund.com> wrote: > >First, thank you for building this softwareHow can I help contribute > on > >GitHub? I have a harmony 890 and use fedora, but to no avail. I'm > being > >forced to update firmware to 4.9, but failing because "firmware > updates > >are not yet supported" Any way I can help or figure this out to add > >support? I'd be happy to submit a pull request. Thanks - AJ > > What specifically is telling you that you have to upgrade the > firmware? Is it the website? Usually you can just ignore most of > what the website says, but if that isn't possible, can you send a > screenshot of that? I've never seen the website require a firmware > update. > > In order to add firmware update support, we would probably need a USB > capture of the official software performing one, unfortunately. > > Scott AJ Seelund Sr. Architect Independent Consulting o: (407) 286.2088 m: (352) 325.1257 a...@seelund.com
_______________________________________________ concordance-devel mailing list concordance-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/concordance-devel
