Re-bonjour,
j'ai eu des r�ponses pour cette carte Guillemot Maxi TV PCI2,
la plus pr�cise �tant d'utiliser les param�tres card=27 et pll=2
pour le module bttv. D'apr�s le fichier bttv.h qui se trouve dans
les sources du noyau de la Mandrake 7.2, la MAXI TV PCI2 semble
effectivement identifi�e sous le num�ro 27 (0x1b).
Malheureusement, apr�s des essais hier soir, ca ne marche pas.
Pour �tre pr�cis, voici mon /etc/modules.conf. J'ai une Mandrake 7.2.
J'ai mis en commentaire les r�sultats des options test�es.
Quelqu'un ayant la meme carte voit il le probl�me ?
A tout hasard, je joins ensuite les extraits de /var/log/messages
g�n�r�s
lorsque le module est charg� suite au lancement de xawtv.
Merci.
# -------------------TV------------------------------
# i2c
alias char-major-89 i2c-dev
options i2c-core i2c_debug=1
options i2c-algo-bit bit_test=1
# bttv (version utilis�e : 0.7.35, celle de la Mandrake 7.2)
alias char-major-81 videodev
alias char-major-81-0 bttv
#----card=10 (BTTV_HAUPPAUGE878) => image marche mais pas le son
options bttv card=10 radio=1 autoload=1 bttv_debug=1
#----card=27 pll=2 (MXI TV PCI2)=> son mais image brouill�e
#options bttv card=27 pll=2
options tuner type=3 debug=1
# make alsa + msp3400 play nicely
options snd-card-ens snd_index=0
options msp3400 debug=2
#--------------------------------------
avec card=10
-------------
Nov 7 23:39:09 localhost kernel: bttv: driver version 0.7.35 loaded
Nov 7 23:39:09 localhost kernel: bttv: using 2 buffers with 2080k
(4160k total) for capture
Nov 7 23:39:09 localhost kernel: bttv: Bt8xx card found (0).
Nov 7 23:39:09 localhost kernel: bttv0: Brooktree Bt878 (rev 2) bus: 0,
devfn: 120, irq: 10, memory: 0xea000000.
Nov 7 23:39:09 localhost kernel: PCI: Enabling bus mastering for device
00:78
Nov 7 23:39:09 localhost kernel: i2c-algo-bit.o: Adapter: bt848 #0 scl:
1 sda: 1 -- testing...
Nov 7 23:39:09 localhost kernel: i2c-algo-bit.o:1 scl: 0 sda: 0
Nov 7 23:39:09 localhost kernel: i2c-algo-bit.o: bt848 #0 SCL
unexpected low while pulling SDA low!
Nov 7 23:39:09 localhost kernel: bttv0: model: BT878(Hauppauge new
(bt878)) [insmod option]
Nov 7 23:39:09 localhost kernel: bttv: readee error
Nov 7 23:39:09 localhost kernel: bttv0: Hauppauge eeprom: tuner= (4)
Nov 7 23:39:09 localhost kernel: bttv0: Hauppauge msp34xx: reset line
init
Nov 7 23:39:09 localhost kernel: i2c-core.o: unregister_adapter adap
[bt848 #0] not found.
Nov 7 23:39:09 localhost kernel: i2c-algo-bit.o: Adapter: bt848 #0 scl:
1 sda: 1 -- testing...
Nov 7 23:39:09 localhost kernel: i2c-algo-bit.o:1 scl: 1 sda: 0
Nov 7 23:39:09 localhost kernel: i2c-algo-bit.o:2 scl: 1 sda: 1
Nov 7 23:39:09 localhost kernel: i2c-algo-bit.o:3 scl: 0 sda: 1
Nov 7 23:39:09 localhost kernel: i2c-algo-bit.o:4 scl: 1 sda: 1
Nov 7 23:39:09 localhost kernel: i2c-algo-bit.o: bt848 #0 passed test.
Nov 7 23:39:09 localhost kernel: tuner: chip found @ 0x61
Nov 7 23:39:09 localhost kernel: bttv0: i2c attach [Philips SECAM]
Nov 7 23:39:09 localhost kernel: i2c-core.o: client [Philips SECAM]
registered to adapter [bt848 #0](pos. 0).
Nov 7 23:39:09 localhost kernel: i2c-core.o: adapter bt848 #0
registered as adapter 0.
Nov 7 23:39:09 localhost kernel: bttv0: PLL: 28636363 => 35468950 ...
ok
Nov 7 23:39:09 localhost kernel: Display at e867e000 is 1024 by 768,
bytedepth 4, bpl 4096
Nov 7 23:39:10 localhost kernel: Display at e867e000 is 1024 by 768,
bytedepth 4, bpl 4096
Nov 7 23:39:10 localhost kernel: tuner: tv freq set to 759.25
avec card=27
------------
Nov 7 23:34:51 localhost kernel: i2c-core.o: unregister_adapter adap
[bt848 #0] not found.
Nov 7 23:34:55 localhost kernel: bttv: driver version 0.7.35 loaded
Nov 7 23:34:55 localhost kernel: bttv: using 2 buffers with 2080k
(4160k total) for capture
Nov 7 23:34:55 localhost kernel: bttv: Bt8xx card found (0).
Nov 7 23:34:55 localhost kernel: bttv0: Brooktree Bt878 (rev 2) bus: 0,
devfn: 120, irq: 10, memory: 0xea000000.
Nov 7 23:34:55 localhost kernel: PCI: Enabling bus mastering for device
00:78
Nov 7 23:34:55 localhost kernel: i2c-algo-bit.o: Adapter: bt848 #0 scl:
1 sda: 1 -- testing...
Nov 7 23:34:55 localhost kernel: i2c-algo-bit.o:1 scl: 0 sda: 0
Nov 7 23:34:55 localhost kernel: i2c-algo-bit.o: bt848 #0 SCL
unexpected low while pulling SDA low!
Nov 7 23:34:55 localhost kernel: bttv0: model: BT878(MAXI TV Video
PCI2) [insmod option]
