Salut JB,
he oui, mais je n'ai pas ose t'en parler,
tu dois etre tellement occupe en ce moment...
A+
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: vendredi 6 juillet 2001 15:16
To: [EMAIL PROTECTED]
Subject: Re: [Confirme] Pb d'acces a un CD-RW de 8cm
Salut Thierry
Alors comme ca tu as un pb avec Linux ;)
Thierry Pioch wrote:
> Bonjour,
>
> j'ai une config Mandrake 8.0 et AMD K6II-400, lecteur DVD, graveur TEAC
> sur carte SCSI.
> Voulant acheter un appareil photo numerique et n'ayant pas de port USB,
> j'ai donc opte pour le SONY MVC-CD300 integrant un graveur pour CD-R/CD-RW
> de 8cm de diametre.
> J'arrive a transferer sans probleme les photos du lecteur DVD ou du
graveur
> vers le disque dur, et a les visualiser (taille max 1,5Mo).
> Par contre, impossible de transferer tout fichier de plus de 2Mo (fichiers
> MPEG).
> La copie s'arrete et le fichier destination est inutilisable.
> En fait, je n'arrive meme pas a visualiser un fichier MPEG de quelques
> centaines
> de Ko copie sans erreur sur le disque.
> Ca fait raler quand je vois que mon PC de bureau sous W2000 me permet de
> tout
> copier et visualiser sans pb!
> Serait-ce un pb lie au support de UDF sous Linux ?
> Dois-je definir un nouveau device type sous supermount pour acceder au
CD-RW
> ?
>
> Toute aide sera la bienvenue
> Merci
>
> Thierry
>
> output de "dmesg":
> ------------------
> ...
> Attached scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
> sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
> ISO 9660 Extensions: Microsoft Joliet Level 3
> scanning for RockRidge behind XA attributes
> ISOFS: changing to secondary root
> scsi0: ERROR on channel 0, id 2, lun 0, CDB: Read (10) 00 00 00 43 2a 00
00
> 3f 00
> [valid=0] Info fld=0x0, Current sd0b:00: sense key Medium Error
> Additional sense indicates No reference position found
> I/O error: dev 0b:00, sector 68776
> scsi0: ERROR on channel 0, id 2, lun 0, CDB: Read (10) 00 00 00 43 30 00
00
> 02 00
> [valid=0] Info fld=0x0, Current sd0b:00: sense key Medium Error
> Additional sense indicates No reference position found
> I/O error: dev 0b:00, sector 68800
> scsi0: ERROR on channel 0, id 2, lun 0, CDB: Read (10) 00 00 00 43 30 00
00
> 02 00
> [valid=0] Info fld=0x0, Current sd0b:00: sense key Medium Error
> Additional sense indicates No reference position found
> I/O error: dev 0b:00, sector 68800
> ISO 9660 Extensions: Microsoft Joliet Level 3
> scanning for RockRidge behind XA attributes
> ISOFS: changing to secondary root
> ISO 9660 Extensions: Microsoft Joliet Level 3
> scanning for RockRidge behind XA attributes
> ISOFS: changing to secondary root
> scsi0: ERROR on channel 0, id 2, lun 0, CDB: Read (10) 00 00 00 73 0a 00
00
> 3f 00
> [valid=0] Info fld=0x0, Current sd0b:00: sense key Medium Error
> Additional sense indicates No reference position found
> I/O error: dev 0b:00, sector 117800
> scsi0: ERROR on channel 0, id 2, lun 0, CDB: Read (10) 00 00 00 73 10 00
00
> 02 00
> [valid=0] Info fld=0x0, Current sd0b:00: sense key Medium Error
> Additional sense indicates No reference position found
> I/O error: dev 0b:00, sector 117824
> scsi0: ERROR on channel 0, id 2, lun 0, CDB: Read (10) 00 00 00 73 10 00
00
> 02 00
> [valid=0] Info fld=0x0, Current sd0b:00: sense key Medium Error
> Additional sense indicates No reference position found
> I/O error: dev 0b:00, sector 117824
> inserting floppy driver for 2.4.3-20mdk
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> ISO 9660 Extensions: Microsoft Joliet Level 3
> scanning for RockRidge behind XA attributes
> ISOFS: changing to secondary root
> hdc: command error: status=0x51 { DriveReady SeekComplete Error }
> hdc: command error: error=0x51
> end_request: I/O error, dev 16:00 (hdc), sector 117800
> hdc: command error: status=0x51 { DriveReady SeekComplete Error }
> hdc: command error: error=0x51
> end_request: I/O error, dev 16:00 (hdc), sector 117804
> hdc: command error: status=0x51 { DriveReady SeekComplete Error }
> hdc: command error: error=0x51
> end_request: I/O error, dev 16:00 (hdc), sector 117808
> hdc: command error: status=0x51 { DriveReady SeekComplete Error }
> hdc: command error: error=0x51
> end_request: I/O error, dev 16:00 (hdc), sector 117812
> hdc: command error: status=0x51 { DriveReady SeekComplete Error }
> hdc: command error: error=0x51
> end_request: I/O error, dev 16:00 (hdc), sector 117816
> hdc: command error: status=0x51 { DriveReady SeekComplete Error }
> hdc: command error: error=0x51
> end_request: I/O error, dev 16:00 (hdc), sector 117820
> hdc: command error: status=0x51 { DriveReady SeekComplete Error }
> hdc: command error: error=0x51
> end_request: I/O error, dev 16:00 (hdc), sector 117824
> hdc: command error: status=0x51 { DriveReady SeekComplete Error }
> hdc: command error: error=0x51
> end_request: I/O error, dev 16:00 (hdc), sector 117828
> hdc: command error: status=0x51 { DriveReady SeekComplete Error }
> hdc: command error: error=0x51
> end_request: I/O error, dev 16:00 (hdc), sector 117832
> hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
> hdc: cdrom_decode_status: error=0x30
> hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
> hdc: cdrom_decode_status: error=0x30
> hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
> hdc: cdrom_decode_status: error=0x30
> hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
> hdc: cdrom_decode_status: error=0x30
> hdc: DMA disabled
> hdc: ATAPI reset complete
> hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
> hdc: cdrom_decode_status: error=0x30
> hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
> hdc: cdrom_decode_status: error=0x30
> hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
> hdc: cdrom_decode_status: error=0x30
> hdc: ATAPI reset complete
> end_request: I/O error, dev 16:00 (hdc), sector 117836
> hdc: command error: status=0x51 { DriveReady SeekComplete Error }
> hdc: command error: error=0x51
> end_request: I/O error, dev 16:00 (hdc), sector 117840
> hdc: command error: status=0x51 { DriveReady SeekComplete Error }
> hdc: command error: error=0x51
> end_request: I/O error, dev 16:00 (hdc), sector 117844
> hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
> hdc: cdrom_decode_status: error=0x30
> hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
> hdc: cdrom_decode_status: error=0x30
> hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
> hdc: cdrom_decode_status: error=0x30
> hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
> hdc: cdrom_decode_status: error=0x30
> hdc: ATAPI reset complete
> hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
> hdc: cdrom_decode_status: error=0x30
> hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
> hdc: cdrom_decode_status: error=0x30
> hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
> hdc: cdrom_decode_status: error=0x30
> hdc: ATAPI reset complete
> end_request: I/O error, dev 16:00 (hdc), sector 117848
> hdc: command error: status=0x51 { DriveReady SeekComplete Error }
> hdc: command error: error=0x51
> end_request: I/O error, dev 16:00 (hdc), sector 117824
> hdc: command error: status=0x51 { DriveReady SeekComplete Error }
> hdc: command error: error=0x51
> end_request: I/O error, dev 16:00 (hdc), sector 117828
> hdc: command error: status=0x51 { DriveReady SeekComplete Error }
> hdc: command error: error=0x51
> end_request: I/O error, dev 16:00 (hdc), sector 117824
> hdc: command error: status=0x51 { DriveReady SeekComplete Error }
> hdc: command error: error=0x51
> end_request: I/O error, dev 16:00 (hdc), sector 117828
> ISO 9660 Extensions: Microsoft Joliet Level 3
> scanning for RockRidge behind XA attributes
> ISOFS: changing to secondary root
> ...
