Re: [Confirme] Le DVD ne rï¿½pond pas ...

Denis Bergeron Thu, 11 Apr 2002 08:29:53 -0700

fais `ls -l /dev/cdrom` 
tu vas voir qu'il s'agit d'un lien symbolique vers un
un disque, crï¿½e un avec la commande ln le mï¿½me lien
pour /dev/dvd.


ï¿½a m'est arrivï¿½ la mï¿½me chose. sur un portable avec un
DVD / cdrw

-Denis B.
 --- Pascal MELIN <[EMAIL PROTECTED]> a ï¿½crit : >
Problï¿½me de DVD !!
> J'ai installï¿½ sans problï¿½me la 8.2
> sauf que si mon lecteur DVD est correctement dï¿½tectï¿½
> impossible de le faire fonctionner.
> Bourrin, j'ai cru ï¿½ un problï¿½me de fstab. Une
> mauvaise manip et hop une rï¿½install ï¿½ faire.
> (note pour un linuxien novice (comme moi) : si tu
> est loggï¿½ en root : fais gaffe ï¿½ ce que tu fais)
> Eh un redemarrage  sans l'interface graphique de la
> Madrake 8.2 m'a mis la puce ï¿½ l'oreille.
> (note pour un linuxien novice (comme moi) : le
> graphique c'est beau quand tout marche !!)
> le message disait de mï¿½moire "cannot locate /dev/dvd
> ..."
> 
> je tape dmesg: 
> 
> 
> Linux version 2.4.18-6mdk
> ([EMAIL PROTECTED]) (gcc version 2.96
> 20000731 (Mandrake Linux 8.2 2.96-0.76mdk)) #1 Fri
> Mar 15 02:59:08 CET 2002
> BIOS-provided physical RAM map:
>  BIOS-e820: 0000000000000000 - 000000000009fc00
> (usable)
>  BIOS-e820: 000000000009fc00 - 00000000000a0000
> (reserved)
>  BIOS-e820: 00000000000f0000 - 0000000000100000
> (reserved)
>  BIOS-e820: 0000000000100000 - 000000001fff0000
> (usable)
>  BIOS-e820: 000000001fff0000 - 000000001fff3000
> (ACPI NVS)
>  BIOS-e820: 000000001fff3000 - 0000000020000000
> (ACPI data)
>  BIOS-e820: 00000000ffff0000 - 0000000100000000
> (reserved)
> hm, page 1fff0000 reserved twice.
> On node 0 totalpages: 131056
> zone(0): 4096 pages.
> zone(1): 126960 pages.
> zone(2): 0 pages.
> Kernel command line: BOOT_IMAGE=LINUX-nonfb ro
> root=306 devfs=mount hdb=ide-scsi hdc=ide-scsi
> ide_setup: hdb=ide-scsi
> ide_setup: hdc=ide-scsi
> Local APIC disabled by BIOS -- reenabling.
> Found and enabled local APIC!
> Initializing CPU#0
> Detected 648.759 MHz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 1294.33 BogoMIPS
> Memory: 513424k/524224k available (1170k kernel
> code, 10412k reserved, 332k data, 260k init, 0k
> highmem)
> Dentry-cache hash table entries: 65536 (order: 7,
> 524288 bytes)
> Inode-cache hash table entries: 32768 (order: 6,
> 262144 bytes)
> Mount-cache hash table entries: 8192 (order: 4,
> 65536 bytes)
> Buffer-cache hash table entries: 32768 (order: 5,
> 131072 bytes)
> Page-cache hash table entries: 131072 (order: 7,
> 524288 bytes)
> CPU: Before vendor init, caps: 0183fbff c1c3fbff
> 00000000, vendor = 2
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K
> (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU: After vendor init, caps: 0183fbff c1c3fbff
> 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU:     After generic, caps: 0183fbff c1c3fbff
> 00000000 00000000
> CPU:             Common caps: 0183fbff c1c3fbff
> 00000000 00000000
> CPU: AMD Athlon(tm) Processor stepping 01
> Enabling fast FPU save and restore... done.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> mtrr: v1.40 (20010327) Richard Gooch
> ([EMAIL PROTECTED])
> mtrr: detected mtrr type: Intel
> PCI: PCI BIOS revision 2.10 entry at 0xfb460, last
> bus=1
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society
> NET3.039
> Initializing RT netlink socket
> apm: BIOS version 1.2 Flags 0x07 (Driver version
> 1.16)
> Starting kswapd
> VFS: Diskquotas version dquot_6.5.0 initialized
> devfs: v1.10 (20020120) Richard Gooch
> ([EMAIL PROTECTED])
> devfs: boot_options: 0x1
> pty: 256 Unix98 ptys configured
> Serial driver version 5.05c (2001-07-08) with HUB-6
> MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP
> enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> block: 128 slots per queue, batch=32
> RAMDISK driver initialized: 16 RAM disks of 32000K
> size 1024 blocksize
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes;
> override with idebus=xx
> AMD7409: IDE controller on PCI bus 00 dev 39
> AMD7409: chipset revision 3
> AMD7409: not 100% native mode: will probe irqs later
> AMD7409: disabling single-word DMA support (revision
> < C4)
>     ide0: BM-DMA at 0xf000-0xf007, BIOS settings:
> hda:DMA, hdb:DMA
>     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings:
> hdc:DMA, hdd:pio
> hda: WDC WD153BA, ATA DISK drive
> hdb: SAMSUNG CD-R/RW SW-216B Q001 20010913, ATAPI
> CD/DVD-ROM drive
> hdc: PIONEER DVD-ROM DVD-114, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: 30043440 sectors (15382 MB) w/2048KiB Cache,
> CHS=1870/255/63, UDMA(33)
> Partition check:
>  /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7
> p8 p9 p10 >
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 4096 buckets,
> 32Kbytes
> TCP: Hash tables configured (established 32768 bind
> 32768)
> Linux IP multicast router 0.06 plus PIM-SM
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> RAMDISK: Compressed image found at block 0
> Uncompressing......done.
> Freeing initrd memory: 133k freed
> VFS: Mounted root (ext2 filesystem).
> Mounted devfs on /dev
> Journalled Block Device driver loaded
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> Freeing unused kernel memory: 260k freed
> Real Time Clock Driver v1.10e
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6),
> internal journal
> Adding Swap: 401584k swap-space (priority -1)
> SCSI subsystem driver Revision: 1.00
> scsi0 : SCSI host adapter emulation for IDE ATAPI
> devices
>   Vendor: SAMSUNG   Model: CD-R/RW SW-216B   Rev:
> Q001
>   Type:   CD-ROM                             ANSI
> SCSI revision: 02
>   Vendor: PIONEER   Model: DVD-ROM DVD-114   Rev:
> 1.22
>   Type:   CD-ROM                             ANSI
> SCSI revision: 02
> kjournald starting.  Commit interval 5 seconds
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,10),
> internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> MSDOS FS: IO charset iso8859-15
> MSDOS FS: Using codepage 850
> MSDOS FS: IO charset iso8859-15
> MSDOS FS: Using codepage 850
> kjournald starting.  Commit interval 5 seconds
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,8),
> internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting.  Commit interval 5 seconds
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,9),
> internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> 8139too Fast Ethernet driver 0.9.24
> eth0: RealTek RTL8139 Fast Ethernet at 0xe0898000,
> 00:50:fc:3b:ba:64, IRQ 11
> eth0:  Identified 8139 chip type 'RTL-8139C'
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> usb-ohci.c: USB OHCI at membase 0xe08b0000, IRQ 5
> usb-ohci.c: usb-00:07.4, Advanced Micro Devices
> [AMD] AMD-756 [Viper] USB
> usb-ohci.c: AMD756 erratum 4 workaround
> usb.c: new USB bus registered, assigned bus number 1
> hub.c: USB hub found
> hub.c: 4 ports detected
> 
=== message truncated ===> Vous souhaitez acquerir
votre Pack ou des Services
> MandrakeSoft?
> Rendez-vous sur "http://www.mandrakestore.com";
>  

__________________________________________________________
Lï¿½che-vitrine ou lï¿½che-ï¿½cran ?
magasinage.yahoo.ca

Vous souhaitez acquerir votre Pack ou des Services MandrakeSoft?
Rendez-vous sur "http://www.mandrakestore.com";

Re: [Confirme] Le DVD ne rï¿½pond pas ...

Répondre à