C'est � a dire?
j'imagine qu'il faut creer une "route", euhhhhhhhhh comment on fait ??
Le lun 03/06/2002 � 00:31, Whisper a �crit :
> Si tu ping avec deux cartes eth de sous masque differents il faut que tu
> cree un chemin entre ton 192.168.0.0/24 et 192.168.1.0/24.
> 
> ----- Original Message -----
> From: "Franck" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Monday, June 03, 2002 12:04 AM
> Subject: [Confirme] impossible de pinger ma machine en local???
> 
> 
> bonjour,
> Sur une Mk8.2, quand je fait ifconfig j'ai :
> 
> eth0      Lien encap:Ethernet  HWaddr 00:50:04:56:55:05
>           inet adr:192.168.1.1  Bcast:192.168.1.255  Masque:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:77 errors:0 dropped:0 overruns:0 carrier:2
>           collisions:0 lg file transmission:100
>           RX bytes:0 (0.0 b)  TX bytes:14134 (13.8 Kb)
>           Interruption:4 Adresse de base:0xb400
> 
> eth1      Lien encap:Ethernet  HWaddr 00:05:5D:A1:3E:21
>           inet adr:192.168.0.1  Bcast:192.168.0.255  Masque:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:2117 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:405 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 lg file transmission:100
>           RX bytes:209793 (204.8 Kb)  TX bytes:47524 (46.4 Kb)
>           Interruption:10 Adresse de base:0xb000
> 
> eth2      Lien encap:Ethernet  HWaddr 52:54:05:F9:28:9A
>           inet adr:10.0.0.10  Bcast:10.0.0.255  Masque:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:7682 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:7777 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:1 lg file transmission:100
>           RX bytes:6315957 (6.0 Mb)  TX bytes:978352 (955.4 Kb)
>           Interruption:3 Adresse de base:0xa800
> 
> lo        Lien encap:Boucle locale
>           inet adr:127.0.0.1  Masque:255.0.0.0
>           UP LOOPBACK RUNNING  MTU:16436  Metric:1
>           RX packets:1418 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:1418 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 lg file transmission:0
>           RX bytes:99708 (97.3 Kb)  TX bytes:99708 (97.3 Kb)
> 
> ppp0      Lien encap:Protocole Point-�-Point
>           inet adr:80.13.198.97  P-t-P:80.13.198.1  Masque:255.255.255.255
>           UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1492  Metric:1
>           RX packets:7169 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:7178 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 lg file transmission:3
>           RX bytes:6125115 (5.8 Mb)  TX bytes:774922 (756.7 Kb)
> 
> j'ai 3 carte r�seau, une pour l'adsl, les 2 autres pour un sous r�seau
> 10M et un 100M. Bref, si je ping une machine distante, ca marche, si je
> ping une adresse ne locale, ca ne marche pas ???, quel peut �tre le
> pb??. J'ai configur� le niveau de s�curit� � l'install sur "standard",
> ..
> 
> Merci de votre aide.
> 
> 
> 
> 
> 
> ----------------------------------------------------------------------------
> ----
> 
> 
> > Vous souhaitez acquerir votre Pack ou des Services MandrakeSoft?
> > Rendez-vous sur "http://www.mandrakestore.com";
> >
> 
> 
> ----
> 

> Vous souhaitez acquerir votre Pack ou des Services MandrakeSoft?
> Rendez-vous sur "http://www.mandrakestore.com";



Vous souhaitez acquerir votre Pack ou des Services MandrakeSoft?
Rendez-vous sur "http://www.mandrakestore.com";

Répondre à