There is one way I can think of for this to happen inside LCF,
and that is if there is a metadata field called “id” attached to
the SharePoint document. So then you will get two “id” fields.
Not sure what to do about this, though. All I can think of is to
suppress all metadata fields called “id” in the solr connector.
Karl
From: Wright Karl (Nokia-S/Cambridge)
Sent: Tuesday, June 22, 2010 1:48 PM
To: [email protected]; [email protected]
Subject: RE: Sharepoint Connector
Actually, LCF does not have the ability to send two id’s. So,
this is almost certainly a Solr issue.
You can verify this using the steps I outlined earlier. The id
that LCF will be sending is a url, but that url may well have a
comma in it. If it does, it appears that Solr does something
funky with it and interprets it as multiple values.
If you can please confirm that LCF’s ingestion into Solr is using
a URL with commas, then we can go ahead and figure out if there
is a way to address the issue on the solr end.
Thanks,
Karl
From: [email protected] [mailto:[email protected]]
Sent: Tuesday, June 22, 2010 1:03 PM
To: [email protected]
Subject: RE: Sharepoint Connector
Hi,
literal.FileSizeDisplay=1928&literal.deny_token_document=Ad%2BAu
thority
%2BConnector:DEAD_AUTHORITY&literal.Edit=0&literal.DocIcon=xml&li
teral.id=http://orgfudmac:2122/Shared%2520Documents/Test/firsttemp
late
.xml
&literal.LinkFilenameNoMenu=firsttemplate.xml&literal.Created=20
10-05-20T15:10:42&literal.allow_token_document=Ad%2BAuthority
%2BConnecto
r:S
-1
-5-21-1178368992-402679808-390482200-115498&literal.allow_token_doc
ument=Ad%2BAuthority
%2BConnector:S-1-5-21-1178368992-402679808-390482200
-222745&literal.allow_token_document=Ad%2BAuthority
%2BConnector:S-1-5-21
-1178368992
-402679808-390482200-289873&literal.allow_token_document=Ad%2
BAuthority
%2BConnector:S-1-5-21-1178368992-402679808-390482200-519550&li
teral.allow_token_document=Ad%2BAuthority
%2BConnector:S-1-5-21-117836899
2-402679808-390482200-544963&literal.allow_token_document=Ad
%2BAuthority
%2BConnector:S
-1-5-21-374722173-1639260489-1021760189-1020&literal._UIVe
rsionString
=1.0&literal.Title=firsttemplate.xml&literal.ID=6&literal.Mod
ified
=2010-05-20T15:10:42&fmap.content=text&literal.Author=Mukherjee, +Sh
ubhdeep+
(org)&literal.FileLeafRef=firsttemplate.xml&literal.LinkFilename
=firsttemplate.xml&uprefix=attr_&literal.Editor=Mukherjee,
+Shubhdeep+ (or
g)&lowernames=true&literal.ContentType=Document&captureAttr=true
as u can see there are 2 ids being sent! i have hilighted themin
bold. Is this the problem ??
Thanks and Regards
Rohan
From: [email protected] [mailto:[email protected]]
Sent: Tue 6/22/2010 9:48 PM
To: [email protected]
Subject: RE: Sharepoint Connector
Actually, it's clear from the trace that Solr is interpreting the
literal.id url with a comma as being multivalued. I suppose we
should check whether LCF is making some kind of an error in the
original ID, though. Can you use the Simple Report tool to find
one of the ingestion requests for a url that has a comma in it,
and send me the corresponding url? Also, paste that url into a
browser and see if you get the document you expect. If you do,
then LCF is doing everything properly. But Solr is making a
decision about what sort of thing a field can contain. Hopefully
there's a good way to override it in schema.xml, but if not,
there needs to be a way.
Karl
-----Original Message-----
From: Wright Karl (Nokia-S/Cambridge)
Sent: Tuesday, June 22, 2010 12:06 PM
To: [email protected]
Subject: RE: Sharepoint Connector
So, Solr is interpreting the "," in some funky way? That sounds
like potentially incorrect behavior on the part of Solr. Can you
post to the lucene/solr list and ask them if this is intentional
behavior?
Karl
-----Original Message-----
From: ext [email protected] [mailto:[email protected]
]
Sent: Tuesday, June 22, 2010 11:19 AM
To: [email protected]
Subject: RE: Sharepoint Connector
Hi Karl,
Thanks a lot to you :)
But the next error is
SEVERE: org.apache.solr.common.SolrException: Document specifies
multiple unique ids! Id
Because the id is sent like this
"http://orginfudvmtech0:2122/Shared%20Documents/OOPS.docx, 1"
Thanks & Regards,
Rohan G Patil
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Tuesday, June 22, 2010 7:19 PM
To: [email protected]
Subject: RE: Sharepoint Connector
Hi Rohan,
This is actually great news, in that the directions are useful
enough
now so that it is possible to follow them and succeed. ;-)
Anyhow, all you need to do to make this work is to change your Solr
schema definition file (called schema.xml), to declare the field
you are
using for the author to be multivalued. There are some examples
of this
usage in the example solr schema.xml file under example/solr/conf.
Thanks,
Karl
-----Original Message-----
From: ext [email protected] [mailto:[email protected]
]
Sent: Tuesday, June 22, 2010 9:25 AM
To: [email protected]
Subject: RE: Sharepoint Connector
Hi,
Finally the Sharepoint connection is functional. But I have
stumbled on
to a new problem.
There are multiple values for author field in sharepoint,
therefore its
giving a bad request error. The logs is
Jun 22, 2010 6:37:38 PM org.apache.solr.common.SolrException log
SEVERE: org.apache.solr.common.SolrException: ERROR:
[http://ctsinbtpvmtech0:2122/Shared%20Documents/Test/
firsttemplate.xml]
multiple values encountered for non multiValued field id:
[http://ctsinbtpvmtech0:2122/Shared%20Documents/Test/
firsttemplate.xml,
6]
at
org
.apache
.solr.update.DocumentBuilder.toDocument(DocumentBuilder.java:2
14)
at
org
.apache
.solr.update.processor.RunUpdateProcessor.processAdd(RunUpdate
ProcessorFactory.java:60)
at
org
.apache
.solr.handler.extraction.ExtractingDocumentLoader.doAdd(Extrac
tingDocumentLoader.java:118)
at
org
.apache
.solr.handler.extraction.ExtractingDocumentLoader.addDoc(Extra
ctingDocumentLoader.java:123)
at
org
.apache
.solr.handler.extraction.ExtractingDocumentLoader.load(Extract
ingDocumentLoader.java:192)
at
org
.apache
.solr.handler.ContentStreamHandlerBase.handleRequestBody(Conte
ntStreamHandlerBase.java:54)
at
org
.apache
.solr.handler.RequestHandlerBase.handleRequest(RequestHandlerB
ase.java:131)
at
org.apache.solr.core.RequestHandlers
$LazyRequestHandlerWrapper.handleReq
uest(RequestHandlers.java:233)
at org.apache.solr.core.SolrCore.execute(SolrCore.java:1316)
at
org
.apache
.solr.servlet.SolrDispatchFilter.execute(SolrDispatchFilter.ja
va:338)
at
org
.apache
.solr.servlet.SolrDispatchFilter.doFilter(SolrDispatchFilter.j
ava:241)
at
org
.apache
.catalina.core.ApplicationFilterChain.internalDoFilter(Applica
tionFilterChain.java:235)
at
org
.apache
.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilt
erChain.java:206)
at
org
.apache
.catalina.core.StandardWrapperValve.invoke(StandardWrapperValv
e.java:233)
at
org
.apache
.catalina.core.StandardContextValve.invoke(StandardContextValv
e.java:191)
at
org
.apache
.catalina.core.StandardHostValve.invoke(StandardHostValve.java
:128)
at
org
.apache
.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java
:102)
at
org
.apache
.catalina.core.StandardEngineValve.invoke(StandardEngineValve.
java:109)
at
org
.apache
.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:2
93)
at
org
.apache
.coyote.http11.Http11Processor.process(Http11Processor.java:84
9)
at
org.apache.coyote.http11.Http11Protocol
$Http11ConnectionHandler.process(
Http11Protocol.java:583)
at
org.apache.tomcat.util.net.JIoEndpoint
$Worker.run(JIoEndpoint.java: 454)
at java.lang.Thread.run(Unknown Source)
Jun 22, 2010 6:37:38 PM org.apache.solr.core.SolrCore execute
INFO: [] webapp=/solr path=/update/extract
params
={literal.FileSizeDisplay=1928&literal.deny_token_document=Ad %2BAu
thority
%2BConnector:DEAD_AUTHORITY&literal.Edit=0&literal.DocIcon=xml&li
teral.id=http://ctsinbtpvmtech0:2122/Shared%2520Documents/Test/
firsttemp
late
.xml
&literal.LinkFilenameNoMenu=firsttemplate.xml&literal.Created=20
10-05-20T15:10:42&literal.allow_token_document=Ad%2BAuthority
%2BConnecto
r:S
-1
-5-21-1178368992-402679808-390482200-115498&literal.allow_token_doc
ument=Ad%2BAuthority
%2BConnector:S-1-5-21-1178368992-402679808-390482200
-222745&literal.allow_token_document=Ad%2BAuthority
%2BConnector:S-1-5-21
-1178368992
-402679808-390482200-289873&literal.allow_token_document=Ad%2
BAuthority
%2BConnector:S-1-5-21-1178368992-402679808-390482200-519550&li
teral.allow_token_document=Ad%2BAuthority
%2BConnector:S-1-5-21-117836899
2-402679808-390482200-544963&literal.allow_token_document=Ad
%2BAuthority
%2BConnector:S
-1-5-21-374722173-1639260489-1021760189-1020&literal._UIVe
rsionString
=1.0&literal.Title=firsttemplate.xml&literal.ID=6&literal.Mod
ified
=2010-05-20T15:10:42&fmap.content=text&literal.Author=Mukherjee, +Sh
ubhdeep+
(org)&literal.FileLeafRef=firsttemplate.xml&literal.LinkFilename
=firsttemplate.xml&uprefix=attr_&literal.Editor=Mukherjee,
+Shubhdeep+ (or
g)&lowernames=true&literal.ContentType=Document&captureAttr=true}
status=400 QTime=550
Jun 22, 2010 6:37:40 PM
org.apache.solr.update.processor.LogUpdateProcessor finish
INFO: {} 0 2006
Jun 22, 2010 6:37:40 PM org.apache.solr.common.SolrException log
SEVERE: org.apache.solr.common.SolrException: ERROR:
[http://ctsinbtpvmtech0:2122/Shared%20Documents/MCMS%20White
%20Paper.doc
x] multiple values encountered for non multiValued field author:
[223423, Mukherjee, Shubhdeep (org)]
at
org
.apache
.solr.update.DocumentBuilder.toDocument(DocumentBuilder.java:2
14)
at
org
.apache
.solr.update.processor.RunUpdateProcessor.processAdd(RunUpdate
ProcessorFactory.java:60)
at
org
.apache
.solr.handler.extraction.ExtractingDocumentLoader.doAdd(Extrac
tingDocumentLoader.java:118)
at
org
.apache
.solr.handler.extraction.ExtractingDocumentLoader.addDoc(Extra
ctingDocumentLoader.java:123)
at
org
.apache
.solr.handler.extraction.ExtractingDocumentLoader.load(Extract
ingDocumentLoader.java:192)
at
org
.apache
.solr.handler.ContentStreamHandlerBase.handleRequestBody(Conte
ntStreamHandlerBase.java:54)
at
org
.apache
.solr.handler.RequestHandlerBase.handleRequest(RequestHandlerB
ase.java:131)
at
org.apache.solr.core.RequestHandlers
$LazyRequestHandlerWrapper.handleReq
uest(RequestHandlers.java:233)
at org.apache.solr.core.SolrCore.execute(SolrCore.java:1316)
at
org
.apache
.solr.servlet.SolrDispatchFilter.execute(SolrDispatchFilter.ja
va:338)
at
org
.apache
.solr.servlet.SolrDispatchFilter.doFilter(SolrDispatchFilter.j
ava:241)
at
org
.apache
.catalina.core.ApplicationFilterChain.internalDoFilter(Applica
tionFilterChain.java:235)
at
org
.apache
.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilt
erChain.java:206)
at
org
.apache
.catalina.core.StandardWrapperValve.invoke(StandardWrapperValv
e.java:233)
at
org
.apache
.catalina.core.StandardContextValve.invoke(StandardContextValv
e.java:191)
at
org
.apache
.catalina.core.StandardHostValve.invoke(StandardHostValve.java
:128)
at
org
.apache
.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java
:102)
at
org
.apache
.catalina.core.StandardEngineValve.invoke(StandardEngineValve.
java:109)
at
org
.apache
.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:2
93)
at
org
.apache
.coyote.http11.Http11Processor.process(Http11Processor.java:84
9)
at
org.apache.coyote.http11.Http11Protocol
$Http11ConnectionHandler.process(
Http11Protocol.java:583)
at
org.apache.tomcat.util.net.JIoEndpoint
$Worker.run(JIoEndpoint.java: 454)
at java.lang.Thread.run(Unknown Source)
Please point me in the right direction.
Thanks & Regards,
Rohan G Patil
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Monday, June 21, 2010 9:05 PM
To: [email protected]
Subject: RE: Sharepoint Connector
Yes. You are still missing:
Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral,
PublicKeyToken=71e9bce111e9429c, processorArchitecture=MSIL
That's a file, usually called "SharePoint.dll", which should be
put in
the place the error message below tells you. Alternatively, you can
simply install SharePoint and it should put the file in the right
place.
Karl
-----Original Message-----
From: ext [email protected] [mailto:[email protected]
]
Sent: Monday, June 21, 2010 11:17 AM
To: [email protected]
Subject: RE: Sharepoint Connector
Hi,
Well fixed the registry settings and still encounter this,
Are some references missing?
Buildfile: D:\Rohan\LCF\modules\connectors\sharepoint\build.xml
calculate-condition:
precompile-check:
build-webservice:
[exec] Microsoft (R) Build Engine Version 2.0.50727.4927
[exec] [Microsoft .NET Framework, Version 2.0.50727.4927]
[exec] Copyright (C) Microsoft Corporation 2005. All rights
reserved.
[exec]
[exec] Could Not Find
D:\Rohan\LCF\modules\connectors\sharepoint\webservice
\bin\*.dll
[exec] The system cannot find the file specified.
[exec] Build started 6/21/2010 8:41:09 PM.
[exec] __________________________________________________
[exec] Project
"D:\Rohan\LCF\modules\connectors\sharepoint\webservice\MCPer
missionsService.csproj" (default targets):
[exec]
[exec] Target ResolveAssemblyReferences:
[exec] Primary reference "Microsoft.SharePoint,
Version=12.0.0.0, Cultu
re=neutral, PublicKeyToken=71e9bce111e9429c,
processorArchitecture=MSIL".
[exec]
c:\windows\Microsoft.NET\Framework\v2.0.50727\Microsoft.Common.t
argets : warning MSB3245: Could not resolve this reference. Could
not
locate the
assembly "Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral,
PublicKeyTok
en=71e9bce111e9429c, processorArchitecture=MSIL". Check to make
sure the
assembl
y exists on disk. If this reference is required by your code, you
may
get compil
ation errors.
[exec] For SearchPath "{TargetFrameworkDirectory}".
[exec] Considered
"C:\Windows\Microsoft.NET\Framework\v2.0.5072
7\Microsoft.SharePoint.exe", but it didn't exist.
[exec] Considered
"C:\Windows\Microsoft.NET\Framework\v2.0.5072
7\Microsoft.SharePoint.dll", but it didn't exist.
[exec] For SearchPath "{AssemblyFolders}".
[exec] Considered "C:\Program Files\Reference
Assemblies\Micros
oft\Framework\v3.5\Microsoft.SharePoint.exe", but it didn't exist.
[exec] Considered "C:\Program Files\Reference
Assemblies\Micros
oft\Framework\v3.5\Microsoft.SharePoint.dll", but it didn't exist.
[exec] For SearchPath "{GAC}".
[exec] Considered "Microsoft.SharePoint,
Version=12.0.0.0, Cult
ure=neutral, PublicKeyToken=71e9bce111e9429c,
processorArchitecture=MSIL", which
was not found in the GAC.
[exec] For SearchPath "{RawFileName}".
[exec] Considered treating "Microsoft.SharePoint,
Version=12.0.
0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c,
processorArchitecture=MSI
L" as a file name, but it didn't exist.
[exec] For SearchPath "bin\".
[exec] Considered "bin\Microsoft.SharePoint.exe", but
it didn't
exist.
[exec] Considered "bin\Microsoft.SharePoint.dll", but
it didn't
exist.
[exec] Done building target "ResolveAssemblyReferences" in
project
"MCPermi
ssionsService.csproj".
[exec] Target CoreCompile:
[exec] C:\Windows\Microsoft.NET\Framework\v2.0.50727\Csc.exe
/noconfig
/nowarn:1701,1702 /errorreport:prompt /warn:4 /define:DEBUG;TRACE
/reference:C:\
Windows\Microsoft.NET\Framework\v2.0.50727\System.Configuration.dll
/reference:C
:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Data.dll
/reference:C:\Windo
ws\Microsoft.NET\Framework\v2.0.50727\System.dll
/reference:C:\Windows\Microsoft
.NET\Framework\v2.0.50727\System.Drawing.dll
/reference:C:\Windows\Microsoft.NET
\Framework\v2.0.50727\System.EnterpriseServices.dll
/reference:C:\Windows\Micros
oft.NET\Framework\v2.0.50727\System.Web.dll
/reference:C:\Windows\Microsoft.NET\
Framework\v2.0.50727\System.Web.Mobile.dll
/reference:C:\Windows\Microsoft.NET\F
ramework\v2.0.50727\System.Web.Services.dll
/reference:C:\Windows\Microsoft.NET\
Framework\v2.0.50727\System.Xml.dll /debug+ /debug:full
/keyfile:MetaCarta.snk /
optimize- /out:obj\Debug\MetaCarta.SharePoint.dll /target:library
MCPermissions.
cs Properties\AssemblyInfo.cs Properties\Settings.Designer.cs "Web
References\SP
PermissionsService\Reference.cs"
[exec] MCPermissions.cs(28,17): error CS0234: The type or
namespace nam
e 'SharePoint' does not exist in the namespace 'Microsoft' (are you
missing an a
ssembly reference?)
[exec] MCPermissions.cs(137,63): error CS0246: The type or
namespace na
me 'SPPrincipal' could not be found (are you missing a using
directive
or an ass
embly reference?)
[exec] MCPermissions.cs(137,83): error CS0246: The type or
namespace na
me 'SPRoleDefinition' could not be found (are you missing a using
directive or a
n assembly reference?)
[exec] Done building target "CoreCompile" in project
"MCPermissionsService.
csproj" -- FAILED.
[exec]
[exec] Done building project "MCPermissionsService.csproj" --
FAILED.
[exec]
[exec] Build FAILED.
[exec]
c:\windows\Microsoft.NET\Framework\v2.0.50727\Microsoft.Common.targe
ts : warning MSB3245: Could not resolve this reference. Could not
locate
the ass
embly "Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral,
PublicKeyToken=7
1e9bce111e9429c, processorArchitecture=MSIL". Check to make sure the
assembly ex
ists on disk. If this reference is required by your code, you may
get
compilatio
n errors.
[exec] MCPermissions.cs(28,17): error CS0234: The type or
namespace
name 'S
harePoint' does not exist in the namespace 'Microsoft' (are you
missing
an assem
bly reference?)
[exec] MCPermissions.cs(137,63): error CS0246: The type or
namespace name '
SPPrincipal' could not be found (are you missing a using
directive or an
assembl
y reference?)
[exec] MCPermissions.cs(137,83): error CS0246: The type or
namespace name '
SPRoleDefinition' could not be found (are you missing a using
directive
or an as
sembly reference?)
[exec] 1 Warning(s)
[exec] 3 Error(s)
[exec]
[exec] Time Elapsed 00:00:00.43
[exec] Cabinet Maker - Lossless Data Compression Tool
[exec]
[exec] Parsing directives
[exec] Parsing directives (MCPermissionsService.ddf: 1
lines)MCPermissionsS
ervice.ddf(26): ERROR: Could not find file: bin
\MetaCarta.SharePoint.dll
[exec] ERROR: MakeCAB aborted: 1 errors encountered
[exec] Result: 1
BUILD SUCCESSFUL
Total time: 1 second
Thanks & Regards,
Rohan G Patil
Cognizant Programmer Analyst Trainee,Bangalore || Mob # +91
9535577001
[email protected]
-----Original Message-----
From: G Patil, Rohan (Cognizant)
Sent: Monday, June 21, 2010 8:25 PM
To: '[email protected]'
Subject: RE: Sharepoint Connector
Hi,
Encountered this
Buildfile: D:\Rohan\LCF\modules\connectors\sharepoint\build.xml
calculate-condition:
precompile-check:
build-webservice:
[copy] Copying 1 file to
D:\Rohan\LCF\modules\connectors\sharepoint\webserv
ice\References\SPPermissionsService
[exec] The system cannot find the file specified.
[exec] The system cannot find the file specified.
[exec] Microsoft (R) Build Engine Version 2.0.50727.4927
[exec] [Microsoft .NET Framework, Version 2.0.50727.4927]
[exec] Copyright (C) Microsoft Corporation 2005. All rights
reserved.
[exec]
[exec] Build started 6/21/2010 8:06:03 PM.
[exec] __________________________________________________
[exec] Project
"D:\Rohan\LCF\modules\connectors\sharepoint\webservice\MCPer
missionsService.csproj" (default targets):
[exec]
[exec] Target GetFrameworkPaths:
[exec] Could not locate the .NET Framework SDK. The task is
looking fo
r the path to the .NET Framework SDK at the location specified in
the
SDKInstall
Rootv2.0 value of the registry key
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFra
mework. You may be able to solve the problem by doing one of the
following: 1.
) Install the .NET Framework SDK. 2.) Manually set the above
registry
key to th
e correct location.
[exec] Target PrepareForBuild:
[exec] Creating directory "bin\".
[exec] Creating directory "obj\Debug\".
[exec] Target ResolveAssemblyReferences:
[exec] Primary reference "Microsoft.SharePoint,
Version=12.0.0.0, Cultu
re=neutral, PublicKeyToken=71e9bce111e9429c,
processorArchitecture=MSIL".
[exec]
c:\windows\Microsoft.NET\Framework\v2.0.50727\Microsoft.Common.t
argets : warning MSB3245: Could not resolve this reference. Could
not
locate the
assembly "Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral,
PublicKeyTok
en=71e9bce111e9429c, processorArchitecture=MSIL". Check to make
sure the
assembl
y exists on disk. If this reference is required by your code, you
may
get compil
ation errors.
[exec] For SearchPath "{TargetFrameworkDirectory}".
[exec] Considered
"C:\Windows\Microsoft.NET\Framework\v2.0.5072
7\Microsoft.SharePoint.exe", but it didn't exist.
[exec] Considered
"C:\Windows\Microsoft.NET\Framework\v2.0.5072
7\Microsoft.SharePoint.dll", but it didn't exist.
[exec] For SearchPath "{AssemblyFolders}".
[exec] Considered "C:\Program Files\Reference
Assemblies\Micros
oft\Framework\v3.5\Microsoft.SharePoint.exe", but it didn't exist.
[exec] Considered "C:\Program Files\Reference
Assemblies\Micros
oft\Framework\v3.5\Microsoft.SharePoint.dll", but it didn't exist.
[exec] For SearchPath "{GAC}".
[exec] Considered "Microsoft.SharePoint,
Version=12.0.0.0, Cult
ure=neutral, PublicKeyToken=71e9bce111e9429c,
processorArchitecture=MSIL", which
was not found in the GAC.
[exec] For SearchPath "{RawFileName}".
[exec] Considered treating "Microsoft.SharePoint,
Version=12.0.
0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c,
processorArchitecture=MSI
L" as a file name, but it didn't exist.
[exec] For SearchPath "bin\".
[exec] Considered "bin\Microsoft.SharePoint.exe", but
it didn't
exist.
[exec] Considered "bin\Microsoft.SharePoint.dll", but
it didn't
exist.
[exec] Done building target "ResolveAssemblyReferences" in
project
"MCPermi
ssionsService.csproj".
[exec] Target CoreCompile:
[exec] C:\Windows\Microsoft.NET\Framework\v2.0.50727\Csc.exe
/noconfig
/nowarn:1701,1702 /errorreport:prompt /warn:4 /define:DEBUG;TRACE
/reference:C:\
Windows\Microsoft.NET\Framework\v2.0.50727\System.Configuration.dll
/reference:C
:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Data.dll
/reference:C:\Windo
ws\Microsoft.NET\Framework\v2.0.50727\System.dll
/reference:C:\Windows\Microsoft
.NET\Framework\v2.0.50727\System.Drawing.dll
/reference:C:\Windows\Microsoft.NET
\Framework\v2.0.50727\System.EnterpriseServices.dll
/reference:C:\Windows\Micros
oft.NET\Framework\v2.0.50727\System.Web.dll
/reference:C:\Windows\Microsoft.NET\
Framework\v2.0.50727\System.Web.Mobile.dll
/reference:C:\Windows\Microsoft.NET\F
ramework\v2.0.50727\System.Web.Services.dll
/reference:C:\Windows\Microsoft.NET\
Framework\v2.0.50727\System.Xml.dll /debug+ /debug:full
/keyfile:MetaCarta.snk /
optimize- /out:obj\Debug\MetaCarta.SharePoint.dll /target:library
MCPermissions.
cs Properties\AssemblyInfo.cs Properties\Settings.Designer.cs "Web
References\SP
PermissionsService\Reference.cs"
[exec] MCPermissions.cs(28,17): error CS0234: The type or
namespace nam
e 'SharePoint' does not exist in the namespace 'Microsoft' (are you
missing an a
ssembly reference?)
[exec] MCPermissions.cs(137,63): error CS0246: The type or
namespace na
me 'SPPrincipal' could not be found (are you missing a using
directive
or an ass
embly reference?)
[exec] MCPermissions.cs(137,83): error CS0246: The type or
namespace na
me 'SPRoleDefinition' could not be found (are you missing a using
directive or a
n assembly reference?)
[exec] Done building target "CoreCompile" in project
"MCPermissionsService.
csproj" -- FAILED.
[exec]
[exec] Done building project "MCPermissionsService.csproj" --
FAILED.
[exec]
[exec] Build FAILED.
[exec]
c:\windows\Microsoft.NET\Framework\v2.0.50727\Microsoft.Common.targe
ts : warning MSB3245: Could not resolve this reference. Could not
locate
the ass
embly "Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral,
PublicKeyToken=7
1e9bce111e9429c, processorArchitecture=MSIL". Check to make sure the
assembly ex
ists on disk. If this reference is required by your code, you may
get
compilatio
n errors.
[exec] MCPermissions.cs(28,17): error CS0234: The type or
namespace
name 'S
harePoint' does not exist in the namespace 'Microsoft' (are you
missing
an assem
bly reference?)
[exec] MCPermissions.cs(137,63): error CS0246: The type or
namespace name '
SPPrincipal' could not be found (are you missing a using
directive or an
assembl
y reference?)
[exec] MCPermissions.cs(137,83): error CS0246: The type or
namespace name '
SPRoleDefinition' could not be found (are you missing a using
directive
or an as
sembly reference?)
[exec] 1 Warning(s)
[exec] 3 Error(s)
[exec]
[exec] Time Elapsed 00:00:01.89
[exec] Cabinet Maker - Lossless Data Compression Tool
[exec]
[exec] Parsing directives
[exec] Parsing directives (MCPermissionsService.ddf: 1
lines)MCPermissionsS
ervice.ddf(26): ERROR: Could not find file: bin
\MetaCarta.SharePoint.dll
[exec] ERROR: MakeCAB aborted: 1 errors encountered
[exec] Result: 1
BUILD SUCCESSFUL
Total time: 3 seconds
I have the latest .Net Framework installed. And the Registry also is
reflecting the proper Path to the .Net Framework path.
Is visual Studio absolutely necessary ?
Thanks & Regards,
Rohan G Patil
Cognizant Programmer Analyst Trainee,Bangalore || Mob # +91
9535577001
[email protected]
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Monday, June 21, 2010 7:58 PM
To: [email protected]
Subject: RE: Sharepoint Connector
That's because you need to follow the instructions to build it.
Karl
-----Original Message-----
From: ext [email protected] [mailto:[email protected]
]
Sent: Monday, June 21, 2010 9:22 AM
To: [email protected]
Subject: RE: Sharepoint Connector
Hi,
But there seems to be one more problem the file
"MetaCarta.SharePoint.MCPermissionsService.wsp" is not available.
Which
is needed to install the webservice.
Thanks & Regards,
Rohan G Patil
Cognizant Programmer Analyst Trainee,Bangalore || Mob # +91
9535577001
[email protected]
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Monday, June 21, 2010 3:34 PM
To: [email protected]
Subject: RE: Sharepoint Connector
(1) Please read the deployment directions. You must install the
MCPermissions service on the SharePoint server, if it is
SharePoint 3.0
or higher and you need security. (If you don't need security, just
select SharePoint 2.0).
(2) Authentication errors are difficult to diagnose, but I would
certainly fix problem (1) before assuming there's a problem.
Karl
________________________________________
From: ext [email protected] [[email protected]]
Sent: Monday, June 21, 2010 2:19 AM
To: [email protected]
Cc: Wright Karl (Nokia-S/Cambridge)
Subject: Sharepoint Connector
Hi! (especially Karl!)
I have two doubts about the Sharepoint Connector.
1) There is a wsdl called MCPermissions in the wsdls directory of
Sharepoint Connector.
Should I delete that, Or should I leave it as it is with the
other wsdls
which we put there prior to building LCF and due to that 302 error
is
displayed i.e. on hitting this
"http://corp.organisation.com/sites/somewhere/_vti_bin/MCPermissions.asm
x" link in the browser, its being redirected to file not found error
page.
2) And using the credentials, I can access the wsdls from the
browser
i.e. Only by GET method.
But the POST is throwing Authentication errors.
Which type of credentials should I use to connect to Sharepoint.
Thanks & Regards,
Rohan G Patil
This e-mail and any files transmitted with it are for the sole use
of
the intended recipient(s) and may contain confidential and
privileged
information.
If you are not the intended recipient, please contact the sender by
reply e-mail and destroy all copies of the original message.
Any unauthorized review, use, disclosure, dissemination, forwarding,
printing or copying of this email or any action taken in reliance on
this
e-mail is strictly prohibited and may be unlawful.
This e-mail and any files transmitted with it are for the sole use
of
the intended recipient(s) and may contain confidential and
privileged
information.
If you are not the intended recipient, please contact the sender by
reply e-mail and destroy all copies of the original message.
Any unauthorized review, use, disclosure, dissemination, forwarding,
printing or copying of this email or any action taken in reliance on
this
e-mail is strictly prohibited and may be unlawful.
This e-mail and any files transmitted with it are for the sole use
of
the intended recipient(s) and may contain confidential and
privileged
information.
If you are not the intended recipient, please contact the sender by
reply e-mail and destroy all copies of the original message.
Any unauthorized review, use, disclosure, dissemination, forwarding,
printing or copying of this email or any action taken in reliance on
this
e-mail is strictly prohibited and may be unlawful.
This e-mail and any files transmitted with it are for the sole use
of
the intended recipient(s) and may contain confidential and
privileged
information.
If you are not the intended recipient, please contact the sender by
reply e-mail and destroy all copies of the original message.
Any unauthorized review, use, disclosure, dissemination, forwarding,
printing or copying of this email or any action taken in reliance on
this
e-mail is strictly prohibited and may be unlawful.
This e-mail and any files transmitted with it are for the sole use
of
the intended recipient(s) and may contain confidential and
privileged
information.
If you are not the intended recipient, please contact the sender by
reply e-mail and destroy all copies of the original message.
Any unauthorized review, use, disclosure, dissemination, forwarding,
printing or copying of this email or any action taken in reliance
on this
e-mail is strictly prohibited and may be unlawful.
