2013/2/4 Jukka Rissanen <jukka.rissa...@linux.intel.com>:
> Hi,
>
>
> On 03.02.2013 19:11, Yevhen Kyriukha wrote:
>>
>> 2013/2/3 Jukka Rissanen <jukka.rissa...@gmail.com>:
>>>
>>> Hi,
>>>
>>> On 2 February 2013 15:02, Yevhen Kyriukha <kirg...@gmail.com> wrote:
>>>>
>>>> My VPN server already push information about routes like:
>>>> server 10.10.10.0 255.255.255.0
>>>> and
>>>> push "route 10.10.10.0 255.255.255.0 vpn_gateway"
>>>>
>>>> If I use openvpn without connman the behavior is correct (routes are
>>>> replaced only if I push "redirect-gateway" from the server).
>>>
>>>
>>> This sounds like a bug.
>>> Can you do following:
>>>
>>> - start vpnd with "connman-vpnd -n -d" and direct the output to a file
>>> - start test/monitor-vpn and direct the output to a file
>>> - connect to your vpn (you should see server pushed routes in debug
>>> output and also in monitor output)
>>> - after successful connection run test/vpn-get to see if we are really
>>> missing the ServerRoutes
>>>
>>>
>>> Cheers,
>>> Jukka
>>
>>
>> Ok, I did these steps and here's what I got:
>>
>> When I run "connman-vpnd -n -d" program closes immediately (you can
>> find output in "connman-vpn.log" file that is attached). Is it
>> correct? Seems that system activates connman-vpnd by dbus.
>
>
> The log says
>
> "No VPN configurations found, quitting."
>
> Meaning that you do not have any VPN configurations around. Did you remove
> all your VPN configurations from disk or are you running with read only
> filesystem for /var/lib/connman?
>
>
>>
>> In output of 'monitor-vpn' I see the following line:
>> ServerRoutes = [[{ ProtocolFamily=4 Netmask=255.255.255.0
>> Network=10.10.10.0 Gateway=10.10.10.81 }][{ ProtocolFamily=4
>> Netmask=255.255.255.0 Network=10.10.10.0 Gateway=10.10.10.81 }]]
>>
>> And output of 'vpn-get' contains following:
>> ServerRoutes = [[{ ProtocolFamily=4 Netmask=255.255.255.0
>> Network=10.10.10.0 Gateway=10.10.10.81 }][{ ProtocolFamily=4
>> Netmask=255.255.255.0 Network=10.10.10.0 Gateway=10.10.10.81 }]]
>
>
> This looks correct.
>
>
>>
>> But 'route -n' gives me the same picture that I was talking before
>> (vpn is a default route iface).
>
>
> This is expected as you have not moved the services yet.
>
> If the /var/lib/connman is non-existent, then you will have weird problems
> anyway.
>
>
> Cheers,
> Jukka
>Hi! > The log says > > "No VPN configurations found, quitting." > > Meaning that you do not have any VPN configurations around. Did you remove > all your VPN configurations from disk or are you running with read only > filesystem for /var/lib/connman? I was writing about that problem on connman mailing list. I have /var/lib/connman folder and it doesn't disappear after reboot. I checked 'mount' and there was no /var or /var/lib directory mounted as read only file system partition. This problem appears when I restart connman-vpn and connman services with previously *connected* (active) VPN connection. I'm not rebooting PC! So all settings exist. So this is the second problem. The first one was overriding default route. You said that if server push some info about routes connman-vpn won't replace default route. _______________________________________________ connman mailing list connman@connman.net http://lists.connman.net/listinfo/connman
