Hi,
On Fri, 2014-01-31 at 09:54 +0100, andrea pola wrote:
> I use two Ethernet interface (one is IP over USB) and the other the real
> one, I 've add to boot a simple script that call connman connect to all the
> devices, and in this way i can obtain all interfaces connected.
>
> If i mantain all the cables connected during boot, i'm ok, and all
> devices will be up and connected.
Actually only the first device that appears will be connected by
ConnMan. Once connected, ConnMan will not connect more networks. The
rest of the devices are connected due to the script you have added.
> If i try to remove one of the cable and reinsert, this device can't
> automatically connect to the network.
> All services has autoconnect flag true.
When you reinsert the cable, the corresponding service gets (re)created
and autoconnect is run. But since ConnMan is connected to the other
network, it won't connect the new one. It's the same situation as above.
So here too the same script could be run as during boot.
Cheers,
Patrik
_______________________________________________
connman mailing list
[email protected]
https://lists.connman.net/mailman/listinfo/connman
