> On ti, 2014-04-01 at 07:25 -0400, Cliff McDiarmid wrote: > > > ----- Original Message ----- > > > From: Jukka Rissanen > > > Sent: 03/30/14 07:03 PM > > > To: connman > > > Subject: Re: 'Not supported' message > > > > > > Hi Cliff, > > > > > > On 30 March 2014 18:44, Cliff McDiarmid <[email protected]> wrote: > > > > Hi > > > > > > > > I'm new to Connman, hoping to move from Wicd. > > > > > > > > I've configured, built and installed 1.22. > > > > > > > > Connman is starting with systemd okay > > > > > > > > When I input 'connmanctl scan wifi' I'm getting: > > > > > > > > 'Error /net/connman/technology/wifi: Not supported' > > > > > > > > Can someone tell me what this means? Wifi is enabled and built in, so > > > > I'm puzzled. > > > > > > You have not powered wifi technology. So try "connmanctl enable wifi" > > > before starting the scan. The radio technologies are by default "off" > > > when connman is started first time. > > > > > > If that does not help, then other alternative is that your > > > wpa_supplicant has not enabled proper options. See connman README file > > > what options are needed for supplicant. > > > > It's no go here. I've rebuilt wpa and the error message is the same, i.e. > > 'Error /net/connman/technology/wifi: Not supported' > > > > Wifi is enabled because 'connmanctl technologies' confirms this. > > > Hmm, that sounds quite weird. What version of wpa_supplicant you have? V2.1
> And what about the kernel version 3.12.1 >and what is the wifi device you want to use? Network controller: Intel Corporation Centrino Advanced-N 6200 (rev 35) > Can you run "connmand -n -d" and paste the debug log somewhere so we can Sent it to your personel, hope that's okay > If possible wpa_supplicant debug log would also be nice to have, just > start it manually with "wpa_supplicant -u -d" before starting connman. wpa_supplicant v2.1 random: Trying to read entropy from /dev/random dbus: Register D-Bus object '/fi/w1/wpa_supplicant1' Providing DBus service 'fi.w1.wpa_supplicant1'. Providing DBus service 'fi.epitest.hostap.WPASupplicant'. Successfully initialized wpa_supplicant random: Got 20/20 bytes from /dev/random - STOP thanks Jukka Cliff _______________________________________________ connman mailing list [email protected] https://lists.connman.net/mailman/listinfo/connman
