Hi Mike, On ti, 2014-07-08 at 08:33 -0400, Mike Purvis wrote: > > I also tried moving my service definition > > to /var/lib/connman/example.config, but this registered no > response > > either. > > > So you are saying that even with this file, the system does > not set the > IP address of the ethernet interface when you plug in the > ethernet > cable? Note that ethernet cable (with other end connected to > switch) > needs to be plugged in before connman will handle the > interface. > If so, please supply debug log of the issue (use pastebin or > similar > service for the log file). Start connman with -d option to get > the debug > log. > > > Ah, didn't realise the cable still had to be connected in order to get > the static IP. In that case, I'll probably stick to just managing the > interface outside of connman— particularly because I'm getting some > instability with v1.24, resulting in the daemon needing to be > restarted every 30-60mins or so. I'd prefer not to lose my static SSH > port while restarting connman. > > > When I have a clearer sense of what's going on with that problem, I'll > post some logs and start a new thread.
Please do report any issues if possible. The latest version has been very stable for me so would be very interested to see your issues. Cheers, Jukka _______________________________________________ connman mailing list [email protected] https://lists.connman.net/mailman/listinfo/connman
