I'll look at that, but it happens every single time I try to connect to the enterprise network
-----Original Message----- From: connman [mailto:[email protected]] On Behalf Of Patrik Flykt Sent: Monday, January 05, 2015 1:34 AM To: [email protected] Subject: Re: No carrier error Hi, On Tue, 2014-12-30 at 00:33 +0000, Thomas Green wrote: > I have come across a very peculiar error. I can connect my system to > an AP that is has no security, WEP security, WPA security with no > issues. When I try to connect with ieee8021x, on the other hand, > something very curious happens. I have kernel messages on, so I can > see the local nic go into the association state after connman prompts > for the username and passphrase. But then things hang there. After a > couple of minutes (my timeout) The call fails. I look at the state of > the connection and it says that it is in association mode. It never > fails. At this point I attempt to force a disconnect of the ongoing > association and I get an error that there is no carrier. At this > point I try to terminate everything with severe prejudice. I stop > connman, rfkill block then unblock the wireless device. I restart > connman. The state of the wireless device is powered and ready. I > try to initiate a scan, and I'm told that there is no carrier. I > verify the state of the wireless is powered and ready. I can only get > to where the wireless nic is usable only after a re-boot. What could > be causing the no carrier error? wpa_supplicant has tied itself into a knot. Restart it and all should be ok. Cheers, Patrik _______________________________________________ connman mailing list [email protected] https://lists.connman.net/mailman/listinfo/connman _______________________________________________ connman mailing list [email protected] https://lists.connman.net/mailman/listinfo/connman
