Patrick, I saw that I could disable autoconnect from services, but the interface was not disabled (consumes energy). The wifi interface could be disabled:
connmanctl disable wifi connmanctl enable wifi Joaquim Duran 2015-05-04 15:38 GMT+02:00 Patrik Flykt <[email protected]>: > On Mon, 2015-05-04 at 14:34 +0200, Joaquim Duran wrote: >> Dear all, >> >> I'm developing an embedded device managed by a custom application. The >> device only have a network interface: the wifi. The wifi interface is >> only activated by the application when it needs to transfer data with >> a server. As the wifi interface is disabled in the most part of time, >> is it possible to configure the connman to disable the wifi interface >> when the connman is executed? > > If one disables autoconnect from the WiFi services, ConnMan does not > connect automatically to them anymore. Autoconnect can be disabled with > 'connmanctl config wifi_XXXXXX autoconnect off', or more generally by > setting the AutoConnect attribute to false with the SetProperty() > service D-Bus method call. After this something else needs to issue a > Technology API Scan() and call Service D-Bus API Connect() when the > network is needed. > > See doc/technology-api.txt and doc/service-api.txt in the source tar > ball. > > Cheers, > > Patrik > > _______________________________________________ > connman mailing list > [email protected] > https://lists.connman.net/mailman/listinfo/connman _______________________________________________ connman mailing list [email protected] https://lists.connman.net/mailman/listinfo/connman
