Hi Tomasz, Sorry for the delay. I was not disconnecting and re-connecting in between. Following your recommandations, I did the following tests using connmanctl :
My device is started in dhcp mode, with 172.21.140.129 as IP address and then here is what I did : connmanctl disconnect ethernet_18550f6e44b3_cable connmanctl config ethernet_18550f6e44b3_cable --ipv4 manual 172.21.140.129 255.255.255.0 172.21.140.254 connmanctl connect ethernet_18550f6e44b3_cable connmanctl disconnect ethernet_18550f6e44b3_cable connmanctl config ethernet_18550f6e44b3_cable --ipv4 dhcp connmanctl connect ethernet_18550f6e44b3_cable The result is the same in the settings file : [ethernet_18550f6e44b3_cable] Name=Wired AutoConnect=true Modified=2015-05-11T13:26:42.581611Z IPv4.method=dhcp IPv6.method=auto IPv6.privacy=disabled IPv4.netmask_prefixlen=24 IPv4.local_address=172.21.140.129 IPv4.gateway=172.21.140.254 IPv4.DHCP.LastAddress=172.21.140.129 At this moment, if I reboot my device I have no more IP address Do you have any idea about something else I could try ? Best Regards Thierry On 08/05/2015 08:18, "Tomasz Bursztyka" <[email protected]> wrote: >Hi Thierry, >> I have an issue using connman when switching from dhcp to manual >>configuration, and coming back to dhcp configuration. >> With the particularity that in the manual configuration I am using >>the address given by the dhcp. > >Do you disconnect and re-connect in between? > >Tomasz >_______________________________________________ >connman mailing list >[email protected] >https://lists.connman.net/mailman/listinfo/connman _______________________________________________ connman mailing list [email protected] https://lists.connman.net/mailman/listinfo/connman
