I also tested against 1.28. The submitted patch was a diff from master though. -Adam
On 5/11/15, 8:24 AM, "Aron Rosenberg" <[email protected]> wrote: >On Mon, May 11, 2015 at 12:44 AM, Patrik Flykt ><[email protected] >> wrote: > >> >> This function is called when an IP configuration changes. As there is no >> socket open to the timeserver, the next time a timeserver is contacted >> the new IP address will be used. Which version/commit of ConnMan was >> used for this patch? >> >> When the default service is changed from one service to another, that is >> handled as before with the 'default_changed' function. >> >> >I have tested this patch against 1.28 when combined with the patch for >"service: set routes only for same family-type" from >https://lists.connman.net/pipermail/connman/2015-March/018934.html with >customer connections in the field - Those folks have dual ipv4/6 setups >where the dhcp6 responds first with no namerserver records. Without this, >timeserver start would bail and never retry due to the check for any >namerserver records. >_______________________________________________ >connman mailing list >[email protected] >https://lists.connman.net/mailman/listinfo/connman Statement of Confidentiality The contents of this e-mail message and any attachments are confidential and are intended solely for the addressee. The information may also be legally privileged. This transmission is sent in trust, and the sole purpose of delivery to the intended recipient. If you have received this transmission in error, any use, reproduction or dissemination of this transmission is strictly prohibited. If you are not the intended recipient, please immediately notify the sender by reply e-mail or at 508.683.2500 and delete this message and its attachments, if any. _______________________________________________ connman mailing list [email protected] https://lists.connman.net/mailman/listinfo/connman
