Hi, We are having a problem in what seems the interaction between connman (1.29) and wpa_supplicant (2.3). It seems that connman disables the wpa_supplicant network each time it gets disconnected (by disconnected I mean beacon loss detection). After a disconnection I see the following on wpa_cli + list_networks:
> network id / ssid / bssid / flags 0 dlink any [DISABLED] 1 dlink any As there is a network, wpa_supplicant keeps scanning and connects succesfully, but after several reconnect-disconnect loops we get the following: > network id / ssid / bssid / flags 0 dlink any [DISABLED] 1 dlink any [DISABLED] 2 dlink any [DISABLED] 3 dlink any [DISABLED] 4 dlink any [DISABLED] So wpa_supplicant does not reconnects automatically since there are no networks enabled. I've not seen this behaviour when using only wpa_supplicant. In that case the network simply appears as this. > network id / ssid / bssid / flags 0 dlink any So my questions are, 1) why connman disables the networks and 2) how can we disable that behaviour, since it is causing us great problems with several customers. Thanks. _______________________________________________ connman mailing list [email protected] https://lists.connman.net/mailman/listinfo/connman
