==================================================================
Please DO NOT REPLY to this mail or send email to the developers
about this bug. Please follow-up to Bugzilla using this link:
http://bugs.contribs.org/show_bug.cgi?id=9077
Have you checked the Frequently Asked Questions (FAQ)?
http://wiki.contribs.org/SME_Server:Documentation:FAQ
Please also take the time to read the following useful guide:
http://www.chiark.greenend.org.uk/~sgtatham/bugs.html
==================================================================
--- Comment #7 from John Crisp <[email protected]> ---
(In reply to Daniel B. from comment #6)
> (In reply to John Crisp from comment #5)
> > [root@test log]# db configuration show openvpn-routed
> > openvpn-routed=service
> > ManagementPassword=**************
> > UDPPort=1194
> > access=public
> > status=enabled
> >
> > So yes :-)
> >
> > Unfortunately that wasn't in the manual to say I had to set it ! ;-)
>
> I need to adjust the contrib so a default value is taken if none is set.
>
OK. Why am I seeing this network in there : 192.168.29.1/24 ??
FYI I have just tried :
config setprop openvpn-routed network 192.168.40.0/24
signal-event openvpn-routed-update
Still the same problem in the logs
> >
> > Can it be the same 'local' network set on the server or should it be a
> > different one ?
>
> No, it must be a different network. That's why it's called routed mode. If
> you want VPN client to be on the same subnet as local ones, you have to
> switch to the bridge contrib
OK
--
You are receiving this mail because:
You are the QA Contact for the bug._______________________________________________
Mail for each SME Contribs bug report
To unsubscribe, e-mail [email protected]
Searchable archive at http://lists.contribs.org/mailman/public/contribteam/
