https://bugs.contribs.org/show_bug.cgi?id=11326
Terry Fage <[email protected]> changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|RESOLVED |VERIFIED
--- Comment #33 from Terry Fage <[email protected]> ---
[root@sme10a5 ~]# rpm -q smeserver-softethervpn-server
smeserver-softethervpn-server-4.34-6.el7.sme.x86_64
[root@sme10a5 ~]# rpm -q smeserver-bridge-interface
smeserver-bridge-interface-0.2-6.el7.sme.noarch
[root@sme10a5 ~]# signal-event post-upgrade; signal-event reboot
[root@sme10a5 ~]# config show bridge
bridge=service
bridgeInterface=br0
ethernetInterface=eth0
status=enabled
tapInterface=tap0
[root@sme10a5 ~]# brctl show
bridge name bridge id STP enabled interfaces
br0 8000.7eff0d82c7c5 no eth0
tap0
[root@sme10a5 ~]# systemctl status vpnserver
● vpnserver.service - SoftEther VPN Server
Loaded: loaded (/usr/lib/systemd/system/vpnserver.service; enabled; vendor
preset: enabled)
Drop-In: /usr/lib/systemd/system/vpnserver.service.d
└─51koozali.conf
Active: active (running) since Thu 2021-01-28 21:50:21 AEDT; 3min 33s ago
Main PID: 1544 (vpnserver)
Memory: 19.4M
CGroup: /system.slice/vpnserver.service
├─1544 /usr/vpnserver/vpnserver execsvc
└─1545 /usr/vpnserver/vpnserver execsvc
Jan 28 21:50:18 sme10a5.sme10a5.fage.org systemd[1]: Starting SoftEther VPN
Server...
Jan 28 21:50:21 sme10a5.sme10a5.fage.org vpnserver[1275]: The SoftEther VPN
Server service has been started.
Jan 28 21:50:21 sme10a5.sme10a5.fage.org vpnserver[1275]: Let's get started by
accessing to the following URL from your PC:
Jan 28 21:50:21 sme10a5.sme10a5.fage.org vpnserver[1275]:
https://127.0.0.1:5555/
Jan 28 21:50:21 sme10a5.sme10a5.fage.org vpnserver[1275]: or
Jan 28 21:50:21 sme10a5.sme10a5.fage.org vpnserver[1275]: https://127.0.0.1/
Jan 28 21:50:21 sme10a5.sme10a5.fage.org vpnserver[1275]: Note: IP address may
vary. Specify your server's IP address.
Jan 28 21:50:21 sme10a5.sme10a5.fage.org vpnserver[1275]: A TLS certificate
warning will appear because the server uses self sign...ning.
Jan 28 21:50:21 sme10a5.sme10a5.fage.org systemd[1]: Started SoftEther VPN
Server.
Hint: Some lines were ellipsized, use -l to show in full.
[root@sme10a5 ~]# systemctl status bridge
● bridge.service - Bridge Interface for VPN use.
Loaded: loaded (/usr/lib/systemd/system/bridge.service; enabled; vendor
preset: enabled)
Active: active (exited) since Thu 2021-01-28 21:50:31 AEDT; 3min 29s ago
Main PID: 1680 (code=exited, status=0/SUCCESS)
Memory: 0B
CGroup: /system.slice/bridge.service
Jan 28 21:50:26 sme10a5.sme10a5.fage.org systemd[1]: Starting Bridge Interface
for VPN use....
Jan 28 21:50:31 sme10a5.sme10a5.fage.org bridge-run[1680]: Starting Bridge
Service: [ OK ]
Jan 28 21:50:31 sme10a5.sme10a5.fage.org systemd[1]: Started Bridge Interface
for VPN use..
[root@sme10a5 ~]# config show bridge
bridge=service
bridgeInterface=br0
ethernetInterface=eth0
status=enabled
tapInterface=tap_tap0
[root@sme10a5 ~]# config show vpnserver
vpnserver=service
TCPPorts=1194,5555
UDPPorts=1194,500,1701,4500
access=public
status=enabled
[root@sme10a5 ~]# ifconfig
br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.2.110 netmask 255.255.255.0 broadcast 192.168.2.255
ether 5e:0e:f3:2f:1a:05 txqueuelen 1000 (Ethernet)
RX packets 1270 bytes 112824 (110.1 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 642 bytes 75088 (73.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eth0: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST> mtu 1500
ether f6:cd:4d:86:7e:57 txqueuelen 1000 (Ethernet)
RX packets 1812 bytes 175843 (171.7 KiB)
RX errors 0 dropped 21 overruns 0 frame 0
TX packets 1125 bytes 100829 (98.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 1000 (Local Loopback)
RX packets 9855 bytes 738616 (721.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 9855 bytes 738616 (721.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
tap_tap0: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST> mtu 1500
ether 5e:0e:f3:2f:1a:05 txqueuelen 1000 (Ethernet)
RX packets 578 bytes 27004 (26.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1230 bytes 100984 (98.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Pending further testing on a server-gateway system, above survives, reboot, and
shutdown.
Is working with a server only system notwithstanding routing on the remote
network.
Marking verified
--
You are receiving this mail because:
You are the QA Contact for the bug._______________________________________________
Mail for each SME Contribs bug report
To unsubscribe, e-mail [email protected]
Searchable archive at https://lists.contribs.org/mailman/public/contribteam/
