+ controller-dev@lists.opendaylight.org Ajay,
Thanks for responding back. Attached is the topology that I am working with. I have some quagga based "SR" devices running OSPF IPv6 (on linux instances) as the control plane and a few linux hosts as endpoints. The objective was to use the control plane routing information and populate the topology on the opendaylight controller and interact with the 'SR nodes' to change the IGP behavior and simulate the SRv6 like behavior to get a feel for the technology and showcase that in our workplace. I see that you recommended using the controller with OpenFlow + BGP PCEP , but since our routers are linux based machines which run the quagga routing daemon we would need OpenFlow plugins on the linux nodes aswell? And the same with BGP+PCEP? I came across some discontinued projects like Quagflow / routeflow which tried to implement this but did not get much traction, do you know about any such agents on the SR devices? Thanks again, Adithya On Tue, Jul 31, 2018 at 2:13 PM, Ajay Lele <ajaysl...@gmail.com> wrote: > > > On Mon, Jul 30, 2018 at 6:27 AM, Adithya Uthamaraj < > adithya.ut...@gmail.com> wrote: > >> Hello, >> >> We are working on a project where we have a bunch of linux nodes running >> OSPF IPv6 as IGP for our SRv6 implementation using traditional linux VMs to >> emulate the routers. We now want to integrate an open source controller >> (like opendaylight) to the setup and make the controller populate the >> topology and also get a feel for the possible things that we can do for >> Traffic Engineering, path computation, TILFA, etc., >> >> We were trying to install openflow agents and interact with the >> controller, but we were not able to do it successfully. We noticed some >> projects like 'routeflow' which tried to do something similar but the >> project did not get too mature. >> > > Can you elaborate on what exactly is not working? > > >> >> Could you please share any documentation on which can point me in the >> right direction to get this going? Any help is greatly appreciated. >> > > Documentation for various OpenDaylight projects is here: > https://docs.opendaylight.org/en/latest/user-guide/ . Based on what you > seem to be trying, you will need base controller + openflow plugin + bgpcep > plugin. ODL distro can be downloaded from: https://docs.opendayligh > t.org/en/latest/downloads.html > > >> Regards, >> Adithya >> >> _______________________________________________ >> controller-dev mailing list >> controller-dev@lists.opendaylight.org >> https://lists.opendaylight.org/mailman/listinfo/controller-dev >> >> >
_______________________________________________ controller-dev mailing list controller-dev@lists.opendaylight.org https://lists.opendaylight.org/mailman/listinfo/controller-dev
