hi,
Sveinar S�pler a �crit :
>
> Is it possible to do nat'ing like this :
>
> I have 128 public ip adresses from my ISP. I want to run several servers++
> and want all my machines to use the public ip's i have from my ISP. Also
> when i connect out from one of my machines to external source, like an FTP
> server or IRC server, i want this to be connected "from" my "real" ip, and
> not the firewall ip.
>
> E.g. My "inside" box has ip adress : 192.168.0.100 My external adress should
> the be nat'ed to 193.212.1.100 (masking away 192.168.0 for 193.212.1) The
> next machine 192.168.0.154 should be 193.212.1.154 and so on..
>
> Is this possible? I have been searching the net for such a solution, but the
> only usable i get, is "let's say you have one ip... ".. But i have 128!
>
> I want to be able to connect to 1 ip adress for my WEB server, another for
> my FTP server+++, and NOT use "Port mapping" at all.. But the "real"
> adress..
>
> Could someone help me out? Is this a possibility in CookFire?
>
> Sveinar S�pler
> Servicekoordinator
> Tech Computers
> Tlf : 22896022
> Mail : [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
>
Yes, another good topology and features for the next product.
If I summary your question:
you want to make a static adress translation ( public network to private
network, or n to n mapping ).
This kind of configuration is not yet included in the wed administration
tools of cooker firewall.
We can add this feature in the next product.
But, if you have technical skills, you can implement this with ipvsadm
and virtual ip on the firewall, for direct routing configuration
for more information:
www.linuxvirtualserver.org
For the masquerading configuration with virtual ip on ethernet interface
, i will test it now and give you an answer. ASAP
--
Philippe Libat <[EMAIL PROTECTED]>
Linux-Mandrake http://www.linux-mandrake.com
_____________________________________________
Think Different, Think Linux
