Eric Howland <[EMAIL PROTECTED]> writes:
>
> 3. I have a very odd thing that I do not understand. This occurs both in
> on a Mac and on a PC. If I set the clients to do DHCP and leave the DNS
> entry blank then the everything is fine with the firewall. But if I manually
> enter the IP number of the DNS then DNS fails and I can only browse by IP
> number and not by domain name. Oddly this is also true if I configure
> both the Mac and PC with static IP numbers (i.e. leaving DNS blank works,
> adding DNS entries breaks the DNS service). All this time I can log onto
> the firewall with ssh and use lynx to browse either by IP number or by
> domain name.
Hi there,
You didn't mention what you have installed on the PC ;)
Also, please send us the dhcpd.conf configuration file because I tried
here the same thing and it works without a problem with windows
clients and MAC clients and Linux clients.
Do you have a internal DNS or not ? I tried here in both cases and it
also works.
Are you sure you've entered the right DNS entries ?
sincerely,
--
Florin http://www.mandrakesoft.com
