Radv�nszki G�bor <[EMAIL PROTECTED]> writes: > 1. Yesterday finally I could make the basic functionality of MNF working in a test >environment - my DSL is connected to a hardware router, and MNF is behind that. > 2. I wonder if it would be working directly on the DSL with PPPoE, with > those ignored dependency-problems.
it should work ... but your should make sure that the ppp and the rp-pppoe packages are installed ... > If that works (I doubt that) I will test the IDSs with some portscans. > 3. I need it not only in this environment, but in the future at many customers's >sites, protecting various kind of connections (dsl, leased line w/router, etc). Fully >functional, running VPN or protecting VPN behind it, DMZ servers, etc. > So I need to make MNF work with your help or choose another software (honestly >smoothwall GPL 2 beta is very promising) > 4. I need to know what form of remote admin notification is possible in > email. I tried to trigger something, but nothing came. > Should it go through a syslog system always? Right now I am running MNF > without it. there are several approaches ... syslog is one of them ... > > -----Original Message----- > From: Florin [mailto:[EMAIL PROTECTED]] > Sent: Monday, November 18, 2002 9:16 PM > To: [EMAIL PROTECTED] > Subject: Re: [Cooker-firewall] Troubles with mnf install - both 8.2 and cooker > > > Radv�nszki G�bor <[EMAIL PROTECTED]> writes: > > > When I ran --nodep the installation went on but the following error > > came: > > > > " > > /var/tmp/rpm-tmp.86993: fg: no job control > > error: execution of %pre scriptlet from snort-1.9.0-2mdk failed, exit > > status 1 " > > What internet access type do you have ? > > The snort error is not really a prb ... > > > > > ??? > > > -----Original Message----- > > > From: Radv�nszki G�bor > > > Sent: Monday, November 18, 2002 7:48 PM > > > To: [EMAIL PROTECTED] > > > Subject: RE: [Cooker-firewall] Troubles with mnf install - > > > both 8.2 and cooker > > > > > > > > > Finally, I used the linux.redbox.cz and I got everything. After > > > downloading Florin's rpms, I deleted two (frontend-fr and snf-fr). > > > The following comes up when I try to run 'rpm -Uvh *.rpm' > > > > > > rp-pppoe is needed by snf-en-8.2-11mdk > > > pptp-adsl is needed by snf-en-8.2-11mdk > > > pptp-client is needed by snf-en-8.2-11mdk > > > /usr/bin/whiptail is needed by snf-en-8.2-12mdk > > > rp-pppoe is needed by snf-en-8.2-12mdk > > > pptp-adsl is needed by snf-en-8.2-12mdk > > > pptp-client is needed by snf-en-8.2-12mdk > > > speedtouch is needed by speedtouch_mgmt-0.1-2mdk > > > > > > What should I do? > > > -- Florin http://www.mandrakesoft.com http://people.mandrakesoft.com/~florin/
