On Tue, 26 Mar 2002, Henrique Helder wrote:
> >ide-scsi is going to probably put the dev at /dev/sgX, rather than hdc > > > >removing and adding mesh on my system, with an external CDR: > > > >scsi0 : MESH > >mesh: target 6 synchronous at 5.0 MB/s > > Vendor: MATSHITA Model: CD-R CW-7503 Rev: 1.06 > > Type: CD-ROM ANSI SCSI revision: 02 > >Attached scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0 > >sr0: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray > >[root@powerbook-cooker root]# ls -l /dev/sg0 > >lr-xr-xr-x 1 root root 36 Mar 25 19:52 /dev/sg0 -> > >scsi/host0/bus0/target6/lun0/generic > > > > I have no /dev/sgX only a empty /dev/scsi/host0/bus0/target0/lun0/ directory. Is >there some way to know what settings mandrake installer is using? > The "X" was a placeholder for a number, say "0". The TiBook I had on loan was OK with the CDROM, either with or without ide-scsi, as I was was testing the xmms-cdread plugin with it. You could try removing the ide-scsi entry and see if it shows up as hdc again. Stew Benedict -- MandrakeSoft PPC FAQ: http://www.linux-mandrake.com/en/demos/PPC/FAQ/
