My HP USB printer & Alcatel Speedtouch modem are both working very well, just did a test print and all is well. If i do a dmesg or dmesg | grep USB i get what you see below
[colin@colinsbox colin]$ dmesg | grep USB usb-ohci.c: USB OHCI at membase 0xd98cb000, IRQ 27 usb-ohci.c: usb-01:18.0, Apple Computer Inc. KeyLargo/Pangea USB usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found usb-ohci.c: USB OHCI at membase 0xd98cd000, IRQ 28 usb-ohci.c: usb-01:19.0, Apple Computer Inc. KeyLargo/Pangea USB (#2) usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hid-core.c: USB HID support drivers hub.c: USB new device connect on bus1/1, assigned device number 2 usb.c: USB device 2 (vend/prod 0x6b9/0x4061) is not claimed by any active driver. hub.c: USB new device connect on bus2/1, assigned device number 2 usb.c: USB device 2 (vend/prod 0x3f0/0x604) is not claimed by any active driver.printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 printer.c: v0.8:USB Printer Device Class driver usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110 usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 192 rq 18 len 8 ret -110 usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 192 rq 18 len 8 ret -110 [colin@colinsbox colin]$ I don't really understand the last 3 lines. Can you tell me ? like i said my USB devices seems to be working ok, although i have to manuly load the micro code into the modem. I can then connect. many thanks Colin
