well it worked for about a week and now quit working again
I am using a promise ide-max2 card to add aditional ide devices to my
computer. The first 2 ide channels are full, so in an attempt to make it
easy to upgrade I added this card to my machine when I needed more
space.
I have a cd-rw attached to the third ide channel and I have set the
hardware address to
io= 1e8
irq=11
I have and append line that says
append="ide2=0x1e8,11 hde=ide-scsi"
this worked for about one week.
what are my options? Hardware problem? I don't think so but since I
removed windows I have no sure way to test.
here is my /var/logs/dmesg what I hink is important is separated
Linux version 2.2.11-2mdksmp ([EMAIL PROTECTED]) (gcc version
2.95 1$
mapped APIC to ffffe000 (00286000)
mapped IOAPIC to ffffd000 (00287000)
Detected 267276977 Hz processor.
------------------------------
ide_setup: ide2=0x1e8,11
ide_setup: hde=ide-scsi
-----------------------------------
Console: colour VGA+ 80x25
Calibrating delay loop... 266.24 BogoMIPS
Memory: 79136k/81920k available (1124k kernel code, 428k reserved, 1160k
data, $
VFS: Diskquotas version dquot_6.4.0 initialized
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35 (19990512) Richard Gooch ([EMAIL PROTECTED])
per-CPU timeslice cutoff: 100.10 usecs.
CPU0: Intel Pentium II (Klamath) stepping 03
SMP motherboard not detected. Using dummy APIC emulation.
PCI: PCI BIOS revision 2.10 entry at 0xfb340
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS02 at 0x03e8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
PCSP 1.3 measurement: maximal samplerate 91783 Hz, 18356 Hz used
RAM disk driver initialized: 16 RAM disks of 4096K size
Uniform Multi-Platform E-IDE driver Revision: 6.20
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: Maxtor 83500 A8, ATA DISK drive
hdb: Maxtor 90680D4, ATA DISK drive
hdc: WDC AC310200R, ATA DISK drive
hdd: ASUS CD-S400/A, ATAPI CDROM drive
---------------------------
ide2: ports already in use, skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
--------------------------
hda: Maxtor 83500 A8, 3347MB w/128kB Cache, CHS=6801/16/63, DMA
hdb: Maxtor 90680D4, 6485MB w/256kB Cache, CHS=13176/16/63, UDMA(33)
hdc: WDC AC310200R, 9787MB w/512kB Cache, CHS=19885/16/63, UDMA(33)
hdd: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA
Uniform CDROM driver Revision: 2.55
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
pII_mmx : 604.647 MB/sec
p5_mmx : 633.603 MB/sec
8regs : 480.441 MB/sec
32regs : 259.080 MB/sec
using fastest function: p5_mmx (633.603 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
hda: [PTBL] [850/128/63] hda1 hda2 < hda5 >
hdb: [PTBL] [826/255/63] hdb1
hdc: hdc1
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 72k freed
Adding Swap: 133016k swap-space (priority -1)
