On 14 Jan 2000, Alexandre Dussart wrote:
> You'll find detect-0.9.31(and devel package) in RPM, SOURCE and SRPM
> format...To test detect, install it and run detect(need to be
> root). Sample of detect session below:
Below is the output of the new detect. The CPU info is still wrong. It is
a PPro 180 with no MMX or 3Dnow (the output of /proc/cpuinfo is correct)
Also, the floppy should probably say 3.5" instead of 3"5
It seems to have a problem with the PNP card, although it identifies it
in the report.
[root@pentium autorpm]# detect
detect 0.9.31
Call report function...wait please...
An ISA PnP card has been found but hasn't been identified
The identifier was:ESS0001
Send this id with you system hardware configuration to [EMAIL PROTECTED]
An ISA PnP card has been found but hasn't been identified
The identifier was:ESS0002
Send this id with you system hardware configuration to [EMAIL PROTECTED]
#
# This report has been generated by detect 0.9.31
#
CPU: GenuineIntel: Pentium Pro:179:FPU:MMX:3DNOW
MEMORY:128484:1648:59308:4432:78572:98016:102780
DISK:ATAPI/IDE:/dev/hda:WDC AC22100H:-1:-1:-1:-1
FLOPPY:Floppy Drive Controller:1.44MB 3"5:/dev/fd0
CDROM:ATAPI/IDE:FX810T4:/dev/hdb
VIDEO:PCI:S3 Inc.:86C325 [ViRGE]:SVGA:256:(null):(null)
ETHERNET:PCI:Intel Corporation:82557:(null)
SOUND:ISA:ESS:ES1868 Control Interface:unknown
SOUND:ISA:ESS:ES1868 PnP AudioDrive:sb
Ian
-------------------------------------------
Ian White
email: [EMAIL PROTECTED]
