Alexandre Dussart wrote:
> "Lord And Master;)" <[EMAIL PROTECTED]> writes:
>
> > ---
> > excerp from /usr/share/detect/isa.lst
> > CTL0043 sound sb Creative Labs SB16 unknown
> > CTL0044 sound sb Creative Labs AWE64 Gold HAS_DMA16|HAS_AWE
> > CTL0045 unknown unknown Creative Labs AWE64 16-bit Audio unknown
> > CTL0046 unknown unknown Creative Labs AWE64 16-bit Audio unknown
> > CTL0047 unknown unknown Creative Labs SB16 unknown
> > CTL7002 unknown unknown Creative Labs Programmable Game Port unknown
> > CTL7005 unknown unknown Creative Labs Programmable Game Port unknown
> > CTL0022 unknown unknown Creative Labs AWE64 16-bit Audio unknown
> > and here is the id's from runing pnpdump | grep "Logical device id"
> > # Logical device id CTL0045
> > # Logical device id CTL7002
> > # Logical device id CTL0022
> >
> > so what is the problem?
> >
> > I run "soundconfig" from the prompt click ok and it just sits there.
> >
> > I', not sure what is going on but i know that it dosn't detect it cause when i
>boot up i definitly do
> > not have soudn till i run "sndconfig"
>
> Try to modify the following lines like this:
>
> > CTL0045 sound sb Creative Labs AWE64 16-bit Audio HAS_DMA16|HAS_AWE
> > CTL0022 sound sb Creative Labs AWE64 16-bit Audio HAS_DMA16|HAS_AWE
>
> And try again...
>
> Greets,
> Alex.
>
> --
> MandrakeSoft http://www.mandrakesoft.com/
> --Alexandre
also I noticed one other thing.. when running soundconfig where the dma and irq stuff
is, it shows it by
default as dma 0, dam2 0 etc. shouldn't this be set to more sane values by default?
-DarkWlf
