Sorry should've included my setup... I have the following
PIII 450 oc 558 on ABiT BX6r2
128 SDRam
SBLive
Voodoo 3 3000
3Com905b nic
Tekram 390uw
No IDE loaded (all scsi drives)
networked thru @Home cable
I tried adding append to the LILO and still no luck, I didn't think the 16
meg and the voodoo card was shared, but not sure about that. Thanks.
----- Original Message -----
From: "pixo" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, February 10, 2000 11:37 PM
Subject: Re: [Cooker] Major Problem
> Ray Fisher wrote:
>
> > ...I have made several attempts at
> > making linux recognize the 128 megs of ram I have.
> > ...
> > linux still only recognizes 64 megs of ram.
>
> Does your machine have the video memory shared with the RAM ?
>
> If yes, at install time, you may want to specify 120 instead of 128,
> supposing you have an 8MB card and use 16 or perhaps 24 bit.
> Becarefull if you go higher in resolution, (32 bit), you may need to
> show less, if it accept at all.
>
> You can also configure "LILO" as in the following example:
> append="mem=120M"
>
> pixo
