http://qa.mandrakesoft.com/show_bug.cgi?id=3089
------- Additional Comments From [EMAIL PROTECTED] 2003-03-10 10:33 -------
Happy for U and for the mandrake community but sad for my setup ...
could you post your lspci -v ?
thanks,
--
Arnaud
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
------- Reminder: -------
assigned_to: [EMAIL PROTECTED]
status: UNCONFIRMED
creation_date:
description:
Here is my setup :
hardware :
Athlon XP1600+ 256MB + Nvidia
up to date cooker (for the moment)
kernel : 2.4.21-0.13mdk
nvidia : Kernel Module 1.0-4191
result of modprobe bttv in /var/log/messages :
------
Mar 10 09:57:45 beta kernel: i2c-core.o: i2c core module version 2.7.0 (20021208)
Mar 10 09:57:45 beta kernel: i2c-algo-bit.o: i2c bit algorithm module version
2.7.0 (20021208)
Mar 10 09:57:45 beta kernel: bttv: driver version 0.7.100 loaded
Mar 10 09:57:45 beta kernel: bttv: using 4 buffers with 2080k (8320k total) for
capture
Mar 10 09:57:45 beta kernel: bttv: Host bridge is Acer Laboratories Inc. [ALi]
M1647 Northbridge [MAGiK 1 / MobileMAGiK 1]
Mar 10 09:57:45 beta kernel: bttv: Host bridge needs ETBF enabled.
Mar 10 09:57:45 beta kernel: bttv: Bt8xx card found (0).
Mar 10 09:57:45 beta kernel: PCI: Found IRQ 10 for device 00:0b.0
Mar 10 09:57:45 beta kernel: PCI: Sharing IRQ 10 with 00:0b.1
Mar 10 09:57:45 beta kernel: bttv0: Bt878 (rev 17) at 00:0b.0, irq: 10, latency:
32, mmio: 0xe7000000
Mar 10 09:57:45 beta kernel: bttv0: detected: Hauppauge WinTV [card=10], PCI
subsystem ID is 0070:13eb
Mar 10 09:57:45 beta kernel: bttv0: using: BT878(Hauppauge (bt878))
[card=10,insmod option]
Mar 10 09:57:45 beta kernel: bttv0: enabling ETBF (430FX/VP3 compatibilty)
Mar 10 09:57:45 beta kernel: bttv: reduced PCI latency to 0x0A.
Mar 10 09:57:45 beta kernel: bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
Mar 10 09:57:45 beta kernel: tuner: probing bt848 #0 i2c adapter [id=0x10005]
Mar 10 09:57:45 beta kernel: tuner: chip found @ 0xc2
Mar 10 09:57:45 beta kernel: tuner(bttv): type forced to 3 (Philips
(SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF)) [insmod]
Mar 10 09:57:45 beta kernel: bttv0: i2c attach [client=Philips (SECAM+PAL_BG)
(FI1216MF,ok]
Mar 10 09:57:45 beta kernel: bttv0: Hauppauge eeprom: model=44806, tuner=Philips
FI1216MF MK2 (3), radio=no
Mar 10 09:57:45 beta kernel: tuner: type already set (3)
Mar 10 09:57:45 beta kernel: bttv0: using tuner=3
Mar 10 09:57:45 beta kernel: bttv0: i2c: checking for MSP34xx @ 0x80... not found
Mar 10 09:57:45 beta kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found
Mar 10 09:57:45 beta kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not found
Mar 10 09:57:46 beta kernel: tvaudio: TV audio decoder + audio/video mux driver
Mar 10 09:57:46 beta kernel: tvaudio: known chips:
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951)
Mar 10 09:57:46 beta kernel: bttv0: PLL: 28636363 => 35468950 ... ok
Mar 10 09:57:46 beta kernel: bttv0: registered device video1
Mar 10 09:57:46 beta kernel: bttv0: registered device vbi0
------
everything looks good.
When launching xawtv in overlay mode, the system freeze in 1 to 5 seconds,
no pbs with : xawtv -remote -noxv-video -c /dev/v4l/video1 (I have a webcam on
video0) (grabdisplay mode)
I've tried :
* moving arount my TV card in different slot => nothing
* adding triton1=1 in the bttv options in modules.conf => nothing
* reduced / raised latency for the TV card from 32 to 248 => nothing
I've seen on the v4l mailing list that knoppix works so I will try it tomorrow
to confirm or infirm that.
The main pb I see is that on a fresh desktop with the dynamic linkink to v4l
devices, someone with my kind of setup will have a nice xawtv icon wich will
freeze his system 100% of the time.
too bad... hope I'm the only one !
--
Arnaud
