http://qa.mandrakesoft.com/show_bug.cgi?id=2910
------- Additional Comments From [EMAIL PROTECTED] 2003-03-11 18:15 -------
Sorry I forgot to mention my hardware config. Iam pretty sure this is what is causing
the
problem (after browing the newsgroups and such).
I have two disks, one connected to IDE Primary Master. This shows up as /dev/hde
(This used to showup as /dev/hda before I added 2nd disk)
2nd disk is on Matrox 133 UDMA PCI card. This shows up as /dev/hda. I have Mdk
installed on /dev/hda1.
[EMAIL PROTECTED] ide]# cat /proc/ide/drivers
ide-cdrom version 4.59
ide-scsi version 0.93
ide-disk version 1.1
output of /proc/ide/*/model:
hda:Maxtor 6Y200P0
hde:Maxtor 53073U6
hdg:TOSHIBA DVD-ROM SD-M1612
hdh:CW058D ATAPI CD-R/RW
/etc/lilo.conf:
boot=/dev/fd0
map=/boot/map
vga=normal
default="linux"
keytable=/boot/us.klt
prompt
nowarn
timeout=100
message=/boot/message
menu-scheme=wb:bw:wb:bw
disk=/dev/hde bios=0x81
image=/boot/vmlinuz
label="linux"
root=/dev/hda1
initrd=/boot/initrd.img
append="devfs=mount hdh=ide-scsi acpi=off"
read-only
other=/dev/hde1
label="windows"
table=/dev/hde
map-drive=0x80
to=0x81
map-drive=0x81
to=0x80
other=/dev/fd0
label="floppy"
unsafe
image=/boot/vmlinuz
label="failsafe"
root=/dev/hda1
initrd=/boot/initrd.img
append="failsafe devfs=nomount hdh=ide-scsi acpi=off"
read-only
[EMAIL PROTECTED] ide]# lsmod
Module Size Used by Not tainted
ntfs 77196 0 (autoclean)
sg 34668 0 (autoclean) (unused)
sr_mod 16952 0 (autoclean) (unused)
udf 90496 0 (autoclean)
mga 100928 18
agpgart 40928 3
snd-seq-midi 4800 0 (autoclean) (unused)
snd-emu10k1-synth 5276 0 (autoclean) (unused)
snd-emux-synth 31644 0 (autoclean) [snd-emu10k1-synth]
snd-seq-midi-emul 6780 0 (autoclean) [snd-emux-synth]
snd-seq-virmidi 4572 0 (autoclean) [snd-emux-synth]
snd-seq-oss 31136 0 (unused)
snd-seq-midi-event 5640 0 [snd-seq-midi snd-seq-virmidi snd-seq-oss]
snd-seq 42768 2 [snd-seq-midi snd-emux-synth snd-seq-midi-emul
snd-seq-virmidi snd-seq-oss snd-seq-midi-event]
snd-pcm-oss 43204 0
snd-mixer-oss 14488 0 [snd-pcm-oss]
snd-emu10k1 68112 4 [snd-emu10k1-synth]
snd-pcm 76416 0 [snd-pcm-oss snd-emu10k1]
snd-timer 14408 0 [snd-seq snd-pcm]
snd-rawmidi 17632 0 [snd-seq-midi snd-seq-virmidi snd-emu10k1]
snd-util-mem 3008 0 [snd-emux-synth snd-emu10k1]
snd-hwdep 5376 0 [snd-emu10k1]
snd-ac97-codec 35624 0 [snd-emu10k1]
snd-seq-device 5864 0 [snd-seq-midi snd-emu10k1-synth snd-emux-synth
snd-seq-oss snd-seq snd-emu10k1 snd-rawmidi]
snd 43428 7 [snd-seq-midi snd-emux-synth snd-seq-virmidi
snd-seq-oss
snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-emu10k1 snd-pcm
snd-timer snd-rawmidi snd-util-mem snd-hwdep snd-ac97-codec snd-seq-device]
af_packet 14984 2 (autoclean)
ip_vs 83224 0 (autoclean)
ide-cd 33856 0 (autoclean)
cdrom 31680 0 (autoclean) [sr_mod ide-cd]
floppy 55164 0
tulip 44064 1 (autoclean)
ohci1394 19048 0 (unused)
ieee1394 45932 0 [ohci1394]
nls_iso8859-1 3516 4 (autoclean)
nls_cp850 4316 3 (autoclean)
vfat 11820 3 (autoclean)
fat 37976 0 (autoclean) [vfat]
supermount 15296 4 (autoclean)
ext3 64736 2 (autoclean)
jbd 48564 2 (autoclean) [ext3]
tuner 11776 1 (autoclean)
tvaudio 15068 0 (autoclean) (unused)
bttv 78528 0
i2c-algo-bit 9096 1 [bttv]
i2c-core 21224 0 [tuner tvaudio bttv i2c-algo-bit]
videodev 7904 3 [bttv]
soundcore 6308 0 [snd bttv]
ide-scsi 11312 0
scsi_mod 103316 3 [sg sr_mod ide-scsi]
ehci-hcd 18568 0 (unused)
usb-uhci 24684 0 (unused)
usbcore 73024 1 [ehci-hcd usb-uhci]
rtc 8092 0 (autoclean)
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
------- Reminder: -------
assigned_to: [EMAIL PROTECTED]
status: UNCONFIRMED
creation_date:
description:
Hi, I did a upgrade from 9.0 to 9.1 RC2. During Boot Install stage, I selected
Advanced
and checked create boot disk & clean /tmp on reboot. I left the default Graphical LILO
option on /dev/fd0. It created the boot disk, but I was not prompted for a LILO disk.
(At
this point my USB mouse froze.. I 'll open another bug report separately for that).
At the Summary stage, I selected Boot options and created a boot disk. (with linux,
oldlinux & Windows). The install seem to go very slow at this point (it took couple of
minutes to refresh each screen and my mouse isn't working). The install completed
successefully though.
However when I tried booting with my LILO disk or the boot disk all I got was "L 99 99
99" (yes by boot disk also gave me the L 99 ...s).
Thanks for your attention.
nram (Ramesh Natarajan )
