http://qa.mandrakesoft.com/show_bug.cgi?id=2440
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEEDINFO |UNCONFIRMED
------- Additional Comments From [EMAIL PROTECTED] 2003-03-12 02:00 -------
Hello,
i do not know what i did but , while looking at logs , trying your
helps, searching and error messages in google the sound began to
work.
so unfortunately i am not sure which command helped me.
now in the beginning it says
Starting ALSA version 0.9.0rc6: ali5451. [ OK ]
the settings in control panel are:
Vendor: Acer Laboratories Inc. [ALi]
Alternative drivers: snd-ali5451:snd-trident
Bus: PCI
Bus identification: 10b9:5451:1179:1
Location on the bus: 0:6:0
Description: M5451 PCI South Bridge Audio
Module: trident
Media class: MULTIMEDIA_AUDIO
the related dmesg is now ( i think)
...
ACPI: Subsystem revision 20030122
ACPI: Disabled via command line (acpi=off)
PCI: PCI BIOS revision 2.10 entry at 0xfe5b4, last bus=5
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router ALI [10b9/1533] at 00:07.0
PCI: Found IRQ 11 for device 00:06.0
PCI: Found IRQ 11 for device 00:11.0
PCI: Found IRQ 11 for device 00:11.1
...
ALI15X3: IDE controller at PCI slot 00:04.0
PCI: No IRQ known for interrupt pin A of device 00:04.0. Please try
using pci=bi
osirq.
ALI15X3: chipset revision 195
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xeff0-0xeff7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xeff8-0xefff, BIOS settings: hdc:DMA, hdd:pio
...
PCI: Found IRQ 11 for device 00:02.0
usb-ohci.c: USB OHCI at membase 0xd0932000, IRQ 11
usb-ohci.c: usb-00:02.0, Acer Laboratories Inc. [ALi] USB 1.1 Controller
...
PCI: Found IRQ 11 for device 00:0a.0
...
Linux Kernel Card Services Kernel Version
options: [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 00:11.0
PCI: Found IRQ 11 for device 00:11.1
Yenta IRQ list 06b8, PCI irq11
Socket status: 30000007
Yenta IRQ list 06b8, PCI irq11
Socket status: 30000007
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x408-0x40f
0x480-0x48f 0 x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
PCI: Enabling device 00:06.0 (0000 -> 0003)
PCI: Found IRQ 11 for device 00:06.0
thanks very much four your help. now i have my ears back :-)
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
------- Reminder: -------
assigned_to: [EMAIL PROTECTED]
status: UNCONFIRMED
creation_date:
description:
i use toshiba satellite 1400.
in boot the message says as i pasted below
Loading sound module (trident) Hint: insmod errors can be caused by incorrect
module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.21pre4-6mdk/kernel/drivers/sound/trident.o.gz: init_module: No
such device
modprobe: insmod /lib/modules/2.4.21pre4-6mdk/kernel/drivers/sound/trident.o.gz
failed
modprobe: insmod trident failed
[FAILED]
the related dmesg is ( i guess)
...
PCI: PCI BIOS revision 2.10 entry at 0xfe5b4, last bus=5
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router ALI [10b9/1533] at 00:07.0
PCI: Found IRQ 11 for device 00:06.0
PCI: Found IRQ 11 for device 00:11.0
PCI: Found IRQ 11 for device 00:11.1
...
PCI: No IRQ known for interrupt pin A of device 00:04.0. Please try using pci=bi
osirq.
ALI15X3: chipset revision 195
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xeff0-0xeff7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xeff8-0xefff, BIOS settings: hdc:DMA, hdd:pio
...
PCI: Found IRQ 11 for device 00:02.0
usb-ohci.c: USB OHCI at membase 0xd0932000, IRQ 11
usb-ohci.c: usb-00:02.0, Acer Laboratories Inc. [ALi] USB 1.1 Controller
...
PCI: Found IRQ 11 for device 00:0a.0
...
Linux Kernel Card Services Kernel Version
options: [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 00:11.0
PCI: Found IRQ 11 for device 00:11.1
Yenta IRQ list 06b8, PCI irq11
Socket status: 30000007
Yenta IRQ list 06b8, PCI irq11
Socket status: 30000007
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x408-0x40f 0x480-0x48f 0
x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version 0.14.10h,
20:11:07 Feb 13 2003
PCI: Enabling device 00:06.0 (0000 -> 0003)
PCI: Found IRQ 11 for device 00:06.0
trident: ALi Audio Accelerator found at IO 0x1000, IRQ 11
ALi 5451 did not come out of reset.
trident_ac97_init: error resetting 5451.
Splash status on console 0 changed to off
...
cdrom: This disc doesn't have any tracks I recognize!
cdrom: This disc doesn't have any tracks I recognize!
Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version 0.14.10h,
20:11:07 Feb 13 2003
PCI: Found IRQ 11 for device 00:06.0
trident: ALi Audio Accelerator found at IO 0x1000, IRQ 11
ALi 5451 did not come out of reset.
trident_ac97_init: error resetting 5451.
i8253 count too high! resetting..
