http://qa.mandrakesoft.com/show_bug.cgi?id=2666
------- Additional Comments From [EMAIL PROTECTED] 2003-03-14 00:10 ------- Problem: ATI Rage video card (r128 driver) and ATI Wonder TV card installed. MKD 9.1 rc1 misidentifies ATI video card as a TVOUT version, when it is NOT. The ATI Wonder TV card is also misidentified as a scsi card. When I run the XSane setup and select the musteck MFC-600S scanner, a zero byte musteck.conf file is created and a full size l4v.conf file is created without asking. XSane sees the l4v 'scanner' but not the musteck scanner. IF I copy my old musteck.conf file from backup and delete the l4v.conf file then XScanner works correctly. THESE PROBLEMS PERSIST in RC2. Hardware review: Athlon 1 GHz with 512MB RAM. 30GB HD at hda PleXwriter at hdb 30GB HD at hdc Toshiba DVD at hdd ATI Rage video card (r128) ATI Wonder TV card (card=63 tuner=2) MAG 770V monitor AC97 mobo sound chip jumpered off SBLive! PCI card active. Samsung ML-1210 laser on lp0 using CUPS. Microsoft Sidewinder analog joystick on SBLive joystick port. ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: I am running an Athlon 1GHz box with 512 MB RAM. I have an ATI Rage 128 video card and I have an ATI Wonder TV card. MDK 8.2 correctly assigned the r128 driver. MDK 9.1 rc 1 MMC will only assign tht ATI Rage 128 TVOUT driver even if I do manual configuration. It gets worse. I also have an NCR53c810 scsi attached to a Mustek MFC-600S scanner. MCC thinks the bttv card is a scsi device. When I run the Scanner configurator under MCC it assigns the bttv card to the Mustek, even though I select the Musteck from the list of scanners. I had to manually copy the mustek.conf from my MDK 8.2 installation in order for XSane to see the Musteck correctly.
