http://qa.mandrakesoft.com/show_bug.cgi?id=865Have you 1Go RAM ? There was a bug preventing installation. If this is your case, try with mem=512m. Hope this helps.
------- Additional Comments From [EMAIL PROTECTED] 2003-03-16 14:09 -------
Also unable installing MDK8.2, 8.1, 9.1RC2 on my:
GA-8SR533P (BIOS updated to version 2 after unable to install mdk8.0,8.2 with v.1 (nothing has changed, problem still remains))
P4 Celeron 2.4GHz
(Those installations CDs work perfectly with an other comput. (PIII))
1) Can't install SCSI Adaptec 2940 U2W card (aic7xxx goes through all 15 targets without success).
2) with F1 -> expert noauto
installation hangs if selecting format / with check partition for bad blocks (mke2fs -F -j -c /dev/hdb1) but no problem if formatting without partition check
3) 'expert noauto' + no 'check partition for bad blocks': even with the most minimalistic installation, hangs when copying files from CD-ROM.
4) installed MDK8.2 on a PIII and put the partition on the GA-8SR533P:
worked on a basic level for a short time, then hung and corrupted / with messages like 'Unable to handle kernel paging request at virtual address ...'
Also not that during the installation trials I got messages like:
-'segfault: seems like memory is missing as the install crashes' (mdk8.2,9.0)
-'getAndSaveFile: No space left on device at /usr/bin/perl-install/per-install_any.pm line 140, <$F> chunk 8E.'
I noted in all the dmesg that I got the following warning:
-----------------------
<4>ENABLING IO-APIC IRQs
<4>Setting 2 in the phys_id_present_map
<6>...changing IO-APIC physical APIC ID to 2 ... ok.
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 2-0, 2-9, 2-10, 2-11 not connected.
<6>..TIMER: vector=0x31 pin1=2 pin2=0
<7>number of MP IRQ sources: 23.
<7>number of IO-APIC #2 registers: 24.
<6>testing the IO APIC.......................
<4>
<7>IO APIC #2......
<7>.... register #00: 02000000
<7>....... : physical APIC id: 02
<7>.... register #01: 00178014
<7>....... : max redirection entries: 0017
<7>....... : PRQ implemented: 1
<7>....... : IO APIC version: 0014
<4>An unexpected IO-APIC was found. If this kernel release is less than
<4>three months old please report this to [EMAIL PROTECTED]
<7>.... register #02: 02000000
<7>....... : arbitration: 02
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 000 00 1 0 0 0 0 0 0 00
<7> 01 001 01 0 0 0 0 0 1 1 39
<7> 02 001 01 0 0 0 0 0 1 1 31
<7> 03 001 01 0 0 0 0 0 1 1 41
<7> 04 001 01 0 0 0 0 0 1 1 49
<7> 05 001 01 0 0 0 0 0 1 1 51
<7> 06 001 01 0 0 0 0 0 1 1 59
<7> 07 001 01 0 0 0 0 0 1 1 61
<7> 08 001 01 0 0 0 0 0 1 1 69
<7> 09 000 00 1 0 0 0 0 0 0 00
<7> 0a 000 00 1 0 0 0 0 0 0 00
<7> 0b 000 00 1 0 0 0 0 0 0 00
<7> 0c 001 01 0 0 0 0 0 1 1 71
<7> 0d 001 01 0 0 0 0 0 1 1 79
<7> 0e 001 01 0 0 0 0 0 1 1 81
<7> 0f 001 01 0 0 0 0 0 1 1 89
<7> 10 001 01 1 1 0 1 0 1 1 91
<7> 11 001 01 1 1 0 1 0 1 1 99
<7> 12 001 01 1 1 0 1 0 1 1 A1
<7> 13 001 01 1 1 0 1 0 1 1 A9
<7> 14 001 01 1 1 0 1 0 1 1 B1
<7> 15 001 01 1 1 0 1 0 1 1 B9
<7> 16 001 01 1 1 0 1 0 1 1 C1
<7> 17 001 01 1 1 0 1 0 1 1 C9
<7>IRQ to pin mappings:
<7>IRQ0 -> 0:2
<7>IRQ1 -> 0:1
<7>IRQ3 -> 0:3
<7>IRQ4 -> 0:4
<7>IRQ5 -> 0:5
<7>IRQ6 -> 0:6
<7>IRQ7 -> 0:7
<7>IRQ8 -> 0:8
<7>IRQ12 -> 0:12
<7>IRQ13 -> 0:13
<7>IRQ14 -> 0:14
<7>IRQ15 -> 0:15
<7>IRQ16 -> 0:16
<7>IRQ17 -> 0:17
<7>IRQ18 -> 0:18
<7>IRQ19 -> 0:19
<7>IRQ20 -> 0:20
<7>IRQ21 -> 0:21
<7>IRQ22 -> 0:22
<7>IRQ23 -> 0:23
<6>.................................... done.
-----------------------
Windows millenium works fine on that computer with all components. Also all other components: -Hard disks -CD-roms -Geforce4 mmx440 -SBlive soundcard tried on PIII and work fine with mdk8.0,8.2,9.0, WinME (Not tried on MDKs: -2x256mb DDR 333 -GA-8SR533P -CPU 2.4GHz Celeron)
Has anyone been able to install and get work MDK 8.x 9.x on a Gigabyte 8SR533 ?
------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
------- Reminder: -------
assigned_to: [EMAIL PROTECTED]
status: UNCONFIRMED
creation_date: description: I boot mandrake9.1 beta 1 CD-ROMM on a gigabyte 8SR533 motherboard from a CDROM on
IDE interface. the processor is a pentium 4 at 1.8GHZ.
After the loading with the "loading to memory" screen,
I get an
install exited abnormaly :-( -- signal 11
or "I get second stage install" and then it blocks
I installed with no problem mandrake9.0 on a pentium III architecture with the same CD-ROM I installed with no problem windows 2000 on the same pentium 4 motherborad (just to test if the hardware is OK)
Eric
