http://qa.mandrakesoft.com/show_bug.cgi?id=3459
Product: kernel
Component: libsasl2-plug-ntlm
Summary: MDK 8.x->9.1RC2 not working (Motherboard GA-8sr533)
Version: 2.4.21-0.pre4.1mdk
Platform: PC
OS/Version: All
Status: UNCONFIRMED
Severity: critical
Priority: P2
AssignedTo: [EMAIL PROTECTED]
ReportedBy: [EMAIL PROTECTED]
I already posted this on the stade1 bug zone, but now think this is more kernel
related:
Also unable installing MDK8.2, 8.1, 9.1RC2 on my:
GA-8SR533P (BIOS updated to version 2 after unable to install mdk8.0,8.2 with
v.1 (nothing has changed, problem still remains))
P4 Celeron 2.4GHz
(Those installations CDs work perfectly with an other comput. (PIII))
1) Can't install SCSI Adaptec 2940 U2W card (aic7xxx goes through all 15 targets
without success).
2) with F1 -> expert noauto
installation hangs if selecting format / with check partition for bad blocks
(mke2fs -F -j -c /dev/hdb1) but no problem if formatting without partition check
3) 'expert noauto' + no 'check partition for bad blocks': even with the most
minimalistic installation, hangs when copying files from CD-ROM.
4) installed MDK8.2 on a PIII and put the partition on the GA-8SR533P:
worked on a basic level for a short time, then hung and corrupted / with
messages like 'Unable to handle kernel paging request at virtual address ...'
Also not that during the installation trials I got messages like:
-'segfault: seems like memory is missing as the install crashes' (mdk8.2,9.0)
-'getAndSaveFile: No space left on device at
/usr/bin/perl-install/per-install_any.pm line 140, <$F> chunk 8E.'
I noted in all the dmesg that I got the following warning:
-----------------------
<4>ENABLING IO-APIC IRQs
<4>Setting 2 in the phys_id_present_map
<6>...changing IO-APIC physical APIC ID to 2 ... ok.
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 2-0, 2-9, 2-10, 2-11 not connected.
<6>..TIMER: vector=0x31 pin1=2 pin2=0
<7>number of MP IRQ sources: 23.
<7>number of IO-APIC #2 registers: 24.
<6>testing the IO APIC.......................
<4>
<7>IO APIC #2......
<7>.... register #00: 02000000
<7>....... : physical APIC id: 02
<7>.... register #01: 00178014
<7>....... : max redirection entries: 0017
<7>....... : PRQ implemented: 1
<7>....... : IO APIC version: 0014
<4>An unexpected IO-APIC was found. If this kernel release is less than
<4>three months old please report this to [EMAIL PROTECTED]
<7>.... register #02: 02000000
<7>....... : arbitration: 02
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 000 00 1 0 0 0 0 0 0 00
<7> 01 001 01 0 0 0 0 0 1 1 39
<7> 02 001 01 0 0 0 0 0 1 1 31
<7> 03 001 01 0 0 0 0 0 1 1 41
<7> 04 001 01 0 0 0 0 0 1 1 49
<7> 05 001 01 0 0 0 0 0 1 1 51
<7> 06 001 01 0 0 0 0 0 1 1 59
<7> 07 001 01 0 0 0 0 0 1 1 61
<7> 08 001 01 0 0 0 0 0 1 1 69
<7> 09 000 00 1 0 0 0 0 0 0 00
<7> 0a 000 00 1 0 0 0 0 0 0 00
<7> 0b 000 00 1 0 0 0 0 0 0 00
<7> 0c 001 01 0 0 0 0 0 1 1 71
<7> 0d 001 01 0 0 0 0 0 1 1 79
<7> 0e 001 01 0 0 0 0 0 1 1 81
<7> 0f 001 01 0 0 0 0 0 1 1 89
<7> 10 001 01 1 1 0 1 0 1 1 91
<7> 11 001 01 1 1 0 1 0 1 1 99
<7> 12 001 01 1 1 0 1 0 1 1 A1
<7> 13 001 01 1 1 0 1 0 1 1 A9
<7> 14 001 01 1 1 0 1 0 1 1 B1
<7> 15 001 01 1 1 0 1 0 1 1 B9
<7> 16 001 01 1 1 0 1 0 1 1 C1
<7> 17 001 01 1 1 0 1 0 1 1 C9
<7>IRQ to pin mappings:
<7>IRQ0 -> 0:2
<7>IRQ1 -> 0:1
<7>IRQ3 -> 0:3
<7>IRQ4 -> 0:4
<7>IRQ5 -> 0:5
<7>IRQ6 -> 0:6
<7>IRQ7 -> 0:7
<7>IRQ8 -> 0:8
<7>IRQ12 -> 0:12
<7>IRQ13 -> 0:13
<7>IRQ14 -> 0:14
<7>IRQ15 -> 0:15
<7>IRQ16 -> 0:16
<7>IRQ17 -> 0:17
<7>IRQ18 -> 0:18
<7>IRQ19 -> 0:19
<7>IRQ20 -> 0:20
<7>IRQ21 -> 0:21
<7>IRQ22 -> 0:22
<7>IRQ23 -> 0:23
<6>.................................... done.
-----------------------
Windows millenium works fine on that computer with all components.
Also all other components:
-Hard disks
-CD-roms
-Geforce4 mmx440
-SBlive soundcard
tried on PIII and work fine with mdk8.0,8.2,9.0, WinME
(Not tried on MDKs:
-2x256mb DDR 333
-GA-8SR533P
-CPU 2.4GHz Celeron)
Has anyone been able to install and get work MDK 8.x 9.x on a Gigabyte 8SR533 ?
PS: I tried the 'noapic' trick, and got the SCSI Adaptec card to be properly
recognized during the install, and the format with bad blocks check to work,
but the whole system still hung at CDROM install (file copying and unpacking to
the HD)
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
