http://qa.mandrakesoft.com/show_bug.cgi?id=992
------- Additional Comments From [EMAIL PROTECTED] 2003-04-05 02:09 ------- forgot to tell something...hehe... first to install the system: press F1 on Graphical Menu, then type "alt1" - whithout the quotes - (it boots install using a 2.2 kernel) You need also to make a bootdisk (using one of 2.2 kernel bootdisks found on mandrake 9.1 cd) after you finish installing, you need to use the bootdisk to boot your system. Again, press F1 on Graphical Menu, then type "rescue root=/dev/????", where ???? is your root partition. after you boot you just need to recompile the kernel, and VOIL�! :) (well,actually, not just VOIL�...it took me at least 5 kernel recompilations...) Ps.: use mandrake kernel source, since you'll only find "supermount" on mandrake kernel source. ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: I have a K7VMM Mother Board, Athlon XP-1800, 256 DDR-RAM, 80GB HDD, Liteon CDRW. I have other Athlon machines to. On the K7VMM instalation of mandrake 9.1 betas 2 froze the PC just after the very first screen where you can pres enter or F1. I have presed F1 and tryed text, noapic, meem=248 (8 are video), I have also tried changind lost of things at BIOS. Nothing works. The same happens with Mandrake 9.0 relase version and RedHat8.0. Mandrake 8.2 Installs and run very good. No text is displayed so ther are no mesages I can add. A guy on a forum told me to install 8.2 and then to upgrade to 9.0 threw a floppy disk (direct instalation with floppy does not work) When I get this info my drive was unusuable so I have not try. I did try the installation from floppy does not work.
